AutoCAD Civil 3D General

Reply
*James Wedding
Message 1 of 4 (85 Views)

C3D Webcast DVB File

85 Views, 3 Replies
01-21-2005 02:19 PM
In case you are curious, attached is the stripped down Webcast DVB file that I used today. I realized after the webcast that I didn't clearly explain the purpose of the SetPoints routine that I ran through. Most of you are familiar with Civil Subdivision Grading. We use this tool to set points at the TC, ROW, Building Line, Rear Pad Line, and Backyard Swale Line, all based on a relative offset from the Proposed CL elevation. Using this tool, we set the offset amount, then snap to the offset points down one side of the street, setting points all the way. Switch to the other side of the street, set the same offsets. Return to the dialog box, change the point description and Vert Offset and go back into the drawing to set the next strip of points. If you have any questions on how it works, please let me know. Thanks. -- James Wedding, P.E. Technology Manager & Associate Jones & Boyd, Inc. Dallas, TX XP/2 on P4-3.4/1G LDT2005SP1 & C3D2005SP1
*Neil W
Message 2 of 4 (85 Views)

Re: C3D Webcast DVB File

01-21-2005 02:26 PM in reply to: *James Wedding
Thanks for clarifying James. I was wondering why you wanted to use alignments to set the points. "James Wedding" wrote in message news:41f18012_2@newsprd01... > In case you are curious, attached is the stripped down Webcast DVB file > that I used today. I realized after the webcast that I didn't clearly > explain the purpose of the SetPoints routine that I ran through. > > Most of you are familiar with Civil Subdivision Grading. We use this tool > to set points at the TC, ROW, Building Line, Rear Pad Line, and Backyard > Swale Line, all based on a relative offset from the Proposed CL elevation. > Using this tool, we set the offset amount, then snap to the offset points > down one side of the street, setting points all the way. Switch to the > other side of the street, set the same offsets. Return to the dialog box, > change the point description and Vert Offset and go back into the drawing > to set the next strip of points. > > If you have any questions on how it works, please let me know. Thanks. > > -- > James Wedding, P.E. > Technology Manager & > Associate > Jones & Boyd, Inc. > Dallas, TX > XP/2 on P4-3.4/1G > LDT2005SP1 & C3D2005SP1 > >
*James Wedding
Message 3 of 4 (85 Views)

Re: C3D Webcast DVB File

01-21-2005 02:30 PM in reply to: *James Wedding
We found that using points was faster than cross sections when dealing with short roads like in a subdivision. Intersections are just too frequent for cross-section design to be at full speed (at least for us.) -- James Wedding, P.E. Technology Manager & Associate Jones & Boyd, Inc. Dallas, TX XP/2 on P4-3.4/1G LDT2005SP1 & C3D2005SP1
*Angel Espinoza
Message 4 of 4 (85 Views)

Re: C3D Webcast DVB File

01-21-2005 03:33 PM in reply to: *James Wedding
James, the routine that you are providing here for free is very generous. This capability for Civil 3D is exactly what kept so many users on Softdesk using Madcap/Mapcad when LDt came out. "James Wedding" wrote in message news:41f18012_2@newsprd01... > In case you are curious, attached is the stripped down Webcast DVB file that > I used today. I realized after the webcast that I didn't clearly explain the > purpose of the SetPoints routine that I ran through. > > Most of you are familiar with Civil Subdivision Grading. We use this tool to > set points at the TC, ROW, Building Line, Rear Pad Line, and Backyard Swale > Line, all based on a relative offset from the Proposed CL elevation. Using > this tool, we set the offset amount, then snap to the offset points down one > side of the street, setting points all the way. Switch to the other side of > the street, set the same offsets. Return to the dialog box, change the point > description and Vert Offset and go back into the drawing to set the next > strip of points. > > If you have any questions on how it works, please let me know. Thanks. > > -- > James Wedding, P.E. > Technology Manager & > Associate > Jones & Boyd, Inc. > Dallas, TX > XP/2 on P4-3.4/1G > LDT2005SP1 & C3D2005SP1 > > >

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs