AutoCAD Civil 3D General

Reply
KY9
Member
Posts: 3
Registered: ‎11-01-2012
Message 1 of 7 (309 Views)
Accepted Solution

Boundary Survrey Labels

309 Views, 6 Replies
11-01-2012 07:26 PM

I have to label a boundary survey, then rotate the entire boundary while keeping the bearing and distance intact.

Is there a way to label the entire boundary and rotate it without changing the bearing data.
Or at least disable the dynamic feature of the bearing so that it doesn't change with each rotation.

 

Thanks for the help.

*Expert Elite*
Posts: 2,616
Registered: ‎07-09-2003
Message 2 of 7 (300 Views)

Re: Boundary Survrey Labels

11-01-2012 09:29 PM in reply to: KY9
I'm curious, what's the purpose of rotating things if you don't want to change the bearings?
Matt Kolberg
Cansel - Autodesk Division
http://www.cansel.ca/
KY9
Member
Posts: 3
Registered: ‎11-01-2012
Message 3 of 7 (291 Views)

Re: Boundary Survrey Labels

11-02-2012 05:20 AM in reply to: KY9

Good question. As a surveyor, you want to show the deed bearing and distance in comparison to the new/actual bearing and distance. A lot of old deed information was based on 1927 coordinates or on a different coordinate adjustment system and current survey requirements are based on one requirement.

You have to reference where you got your research data from. And if you happen to have 2 deeds/parcels that are adjoining but have different bearings, you have to show this. And show the new bearings based on current coordinate adjustments.

*Expert Elite*
Posts: 2,616
Registered: ‎07-09-2003
Message 4 of 7 (284 Views)

Re: Boundary Survrey Labels

11-02-2012 06:16 AM in reply to: KY9
How about xrefing the old deeds/parcels complete with their labels into a new dwg with the new deeds , rotaat, move, and scale the xref as required?
Matt Kolberg
Cansel - Autodesk Division
http://www.cansel.ca/
Distinguished Contributor
Posts: 115
Registered: ‎09-12-2008
Message 5 of 7 (273 Views)

Re: Boundary Survrey Labels

11-02-2012 07:33 AM in reply to: KY9

If you are keeping the deed lines the same and just rotating for the final survey you could create a style that shows the original deed bearing and the current bearing. You can create an expression adding or subtracting the angle rotated from the segment direction and add it as part of the label.

It would not be efficient if each line was a different rotation. We have a general line label style to manually type in a deed bearing and/or distance. We use this if we only have a few.  

Distinguished Mentor
Posts: 622
Registered: ‎01-20-2008
Message 6 of 7 (265 Views)

Re: Boundary Survrey Labels

11-02-2012 08:09 AM in reply to: KY9

Something that I routinely do, is have a parcel with lables at the originial bearing base, and another thats rotated. I explode the original lables twice to make them mtext, then I make them annotative (for scaling purposes) and move them to the new lines. Simply and I still have the original parcel along with the new parcel in my drawing.

C3D12-13
Win7x64 6gb
KY9
Member
Posts: 3
Registered: ‎11-01-2012
Message 7 of 7 (240 Views)

Re: Boundary Survrey Labels

11-02-2012 02:47 PM in reply to: rl_jackson

Thanks guys. I have been doing the same method that rl_jackson is talking about.

I just thought maybe there was an override or a way around exploding the 'segment labels'.

 

Thanks again for the help and additional ways of doing it.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs