AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Member
snowczar
Posts: 3
Registered: ‎01-13-2009
Message 1 of 2 (118 Views)

Blocks for Description Keys

118 Views, 1 Replies
01-10-2013 01:07 PM

Hello All,

 

Civil 3D Newbie here.

 

I am making a directory full of the blocks we will use for the description key file to use. My understanding is that all of these blocks (manholes, hydrants, trees...etc) should be on layer "0" and of standard size. Manholes should be about 3' in diameter, transformer pads around 4' square....etc. Essentially, 1 = 1 true scale.

 

Is this true?

 

Thanks Much,

W.S. McDowall

Columbus, Ohio

*Pro
dgordon
Posts: 1,470
Registered: ‎12-14-2006
Message 2 of 2 (112 Views)

Re: Blocks for Description Keys

01-10-2013 01:18 PM in reply to: snowczar

with objects scaled by the drawing scale it really doesn't matter what size the initial block is.   The point is inserted into a box that is for instance 0.1' high in paper space.   once you bring the point into a 40 scale drawing you have to play with the scaling until you get it close to the size you need.    then once it works for one scale it will work for all scales.

 

 

Dan

Civil 3D 2013
Win 7 Pro x64
Intel Xeon 2.0GHz
12Gb Ram
ATI Firepro 4800
Dell T5500
www.preinnewhof.com
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.