Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
My basic sidewalk no longer allows attachment at all four corners, it only allows attachment at the lower right and left hand corners. This is after building several assemblies with SP1A that had attachment points (circles) at all four corners.
Is anyone else having the same problem? Oh, and my urban sidewalk refuses to work if I assign a 0% slope to it. Wonderful!
Take a look... top created with SP3 - bottom created with SP1A
Somehow I suspect a codeset style problem of some kind. My SP3 Sidewalk
looks just like you 1a version. If you want to send me a drawing I will be
happy to take a look.
firstname dot lastname at autodesk wrote in message news:5434060@discussion.autodesk.com...
My basic sidewalk no longer allows attachment at all four corners, it only
allows attachment at the lower right and left hand corners. This is after
building several assemblies with SP1A that had attachment points (circles)
at all four corners.
Is anyone else having the same problem? Oh, and my urban sidewalk refuses
to work if I assign a 0% slope to it. Wonderful!
Take a look... top created with SP3 - bottom created with SP1A
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")