Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

BLURRED IMAGE PLOTS

8 REPLIES 8
Reply
Message 1 of 9
stevenwhite
2555 Views, 8 Replies

BLURRED IMAGE PLOTS

I started having a problem plotting to an HP Design Jet 1055CM with 2008. Everything on the sheet plots OK, except for image files (USGS Topo Maps, Aerial Photo, etc), they come out blurred.
8 REPLIES 8
Message 2 of 9
Anonymous
in reply to: stevenwhite

If you plot to a DWF or PDF then to the plotter, are they also blurred? This will help determine if it is Civil 3D causing the problem or your plotter driver/plotter.
Message 3 of 9
stevenwhite
in reply to: stevenwhite

Yes, If I plot the image from Microsoft Document Imaging ArcMap 9.1 or Adobe, they all come out clean. They only blurr when plotting from AutoCAD.
Message 4 of 9
Anonymous
in reply to: stevenwhite

How are you attaching the images? If you are using the Data Connect and
"attaching" then it's a know bug, using the Map image attach should work.
--

Murph
The world is not FLAT so why is your GIS data?
http://map3d.wordpress.com
wrote in message news:5757026@discussion.autodesk.com...
Yes, If I plot the image from Microsoft Document Imaging ArcMap 9.1 or
Adobe, they all come out clean. They only blurr when plotting from AutoCAD.
Message 5 of 9
stevenwhite
in reply to: stevenwhite

I've attached them using standard image insert, Map Image Insert and Data Connect raster connect in AutoCad, I've tried all three in Civil 3D and Raster Design, same problem. Only the image blurrs everthing else (lines, circle,etc) come out clear.
Message 6 of 9
ctwils00
in reply to: stevenwhite

You can check your Plotter Configuration Settings. The Raster Graphics my need to be turned up. See Attached Image
Message 7 of 9
stevenwhite
in reply to: stevenwhite

Already tried, didn't work. Thanks
Message 8 of 9
stevenwhite
in reply to: stevenwhite

Already tried, didn't work. Thanks
Message 9 of 9
stevenwhite
in reply to: stevenwhite

Problem fixed by using Map Image insert, instead of using DATA CONNECT Raster Image, it blurrs the Image.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report