Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
After setting drawing properties angle to South Azimuth,
any azimuth value over 180 prompts an out of range value.
It says value must be between 0 and 360, I punch in 195 or any value over 180 returns out of range.
I have verified this is a defect and has been written up.
Matt Blanchard
Test Development
Autodesk, Inc.
wrote in message news:4839115@discussion.autodesk.com...
After setting drawing properties angle to South Azimuth,
any azimuth value over 180 prompts an out of range value.
It says value must be between 0 and 360, I punch in 195 or any value over
180 returns out of range.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")