Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Automatic Station and Offset points with Elev from profile
Automatic Station and Offset points with Elev from profile
Ok so I've got an alignment defined with a profile on the alignment. I want to create Civil points along the alignment that retains the elevation from the profile. This would seem like an easy built in thing but I can't seem to find it. I'm using Civil 3D 2007. Can anyone point me in the right direction?
OK nevermind on the above. I figured that out! BUT, when I create profile from file my curve elevations are incorrect. When you type in curve PVIs in the file, is the elevation the PVI elevation or actual elevation? I've tried both but neither seem to fit the curve!
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")