AutoCAD Civil 3D General

Reply
Contributor
GODARRO
Posts: 23
Registered: ‎10-18-2013
Message 1 of 16 (298 Views)
Accepted Solution

Assembly placed lower in intersections

298 Views, 15 Replies
10-23-2013 10:51 AM

I don't know why when I make an automatic intersection the curb assembly is placed on a lower elevation respect to the main and second roads in all quadrants

I post a screen capture of the issue.

 

Any help will be appreciated...

 

 

*Expert Elite*
sboon
Posts: 2,067
Registered: ‎11-08-2005
Message 2 of 16 (262 Views)

Re: Assembly placed lower in intersections

10-23-2013 06:57 PM in reply to: GODARRO

It looks like your elevation targets in the corridor aren't set correctly.

 

Steve
Please use the Accept as Solution or Kudo buttons when appropriate

Contributor
GODARRO
Posts: 23
Registered: ‎10-18-2013
Message 3 of 16 (237 Views)

Re: Assembly placed lower in intersections

10-24-2013 07:35 AM in reply to: sboon

I set the elevation targets to alignments in each region after executing  the automatic inrtersection but don't know if I have to set elevations to sidewalk  roads or if I have to define something as a target before I execute  automatic intersection command.

 

Anyhow I follow the automatic section drawing and nothing else, but no matter what I do quadrant sidewalks allways appear lower than roads sidewalks.

*Expert Elite*
BrianHailey
Posts: 2,749
Registered: ‎04-27-2005
Message 4 of 16 (227 Views)

Re: Assembly placed lower in intersections

10-24-2013 08:12 AM in reply to: GODARRO

If you can, share the drawing and someone will most likely be able to give you a quick answer.

Contributor
GODARRO
Posts: 23
Registered: ‎10-18-2013
Message 5 of 16 (213 Views)

Re: Assembly placed lower in intersections

10-24-2013 10:23 AM in reply to: BrianHailey

I'll try to reduce drawing size and post it.

 

Thanks

Contributor
GODARRO
Posts: 23
Registered: ‎10-18-2013
Message 6 of 16 (206 Views)

Re: Assembly placed lower in intersections

10-24-2013 11:45 AM in reply to: GODARRO

OK.. Here is the compressed drawing.

I have eliminated lots of things and  reduced as much as I could.

 

I Hope it helps...

 

Thanks

 

Contributor
GODARRO
Posts: 23
Registered: ‎10-18-2013
Message 7 of 16 (199 Views)

Re: Assembly placed lower in intersections

10-24-2013 11:49 AM in reply to: GODARRO

For a much easier approach I post the drawing focussing  the view of the difference in level between main roads and intersection.

*Expert Elite*
BrianHailey
Posts: 2,749
Registered: ‎04-27-2005
Message 8 of 16 (196 Views)

Re: Assembly placed lower in intersections

10-24-2013 11:52 AM in reply to: GODARRO

That's the way your assembly is created. Fix it and it should fix the corridor.

 

Contributor
GODARRO
Posts: 23
Registered: ‎10-18-2013
Message 9 of 16 (187 Views)

Re: Assembly placed lower in intersections

10-24-2013 12:21 PM in reply to: BrianHailey

I don't understand what's the problem with the way I created the assembly.

 

I have tried with curb assemblies took directly fron the program and the same thing happens.

*Expert Elite*
sboon
Posts: 2,067
Registered: ‎11-08-2005
Message 10 of 16 (177 Views)

Re: Assembly placed lower in intersections

10-24-2013 12:48 PM in reply to: GODARRO

Some of your subassemblies have been moved after they were attached to the assembly.  Select them. right-click and clear the offset.  You should see them snap back to the correct location, relative to the assembly.

 

Clipboard01.png

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs