Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Assembly not showing in cross sections

5 REPLIES 5
SOLVED
Reply
Message 1 of 6
audave
5078 Views, 5 Replies

Assembly not showing in cross sections

I have everything needed for plotting of cross sections. Alignment, profile, assembly....

 

The "Corridor Section Editor" shows everything as it should be. Existing Ground, Final Grade, Labeling, etc...

 

When "Create Multiple Views" or "Create Section View" only existing Ground shows. All layers are on...

 

Any ideas..

 

Thanks

5 REPLIES 5
Message 2 of 6
audave
in reply to: audave

BTW When plotting sections, in the "Section Display Option"  Existing ground is the  only thing showing, what am I missing, Thanks

Message 3 of 6
Wanita17
in reply to: audave

Have you sampled the corridor?  Under group properties, the sections tab has a 'sample more sources' button (top right had corner) open it up and you will be able to add or remove objects to your section views.

Message 4 of 6
audave
in reply to: Wanita17

That was it! Something simple as usual!!

 

Thanks!!

Message 5 of 6
KhoaiDK
in reply to: Wanita17

where is the group property?

Message 6 of 6

In toolspace go Alignments/Centerline Alignments/Sample Line Groups/SLG-1 (or whichever sample line group you're focused on)/Sections then right click on sections and choose Sample More Sources

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report