What's the best way to model an alley with a 90 degree angle (turn). Do I treat it as an intersection with a zero radius? My typ section is 15 feet width with a 4% slope down to the center of pavement. "V" bottom. Not sure how to get it to model the outside corner and also eliminate the inside overlay. Thanks,
I don't know if I would necessarily use the Intersection tools, but I would make a multi-baseline corridor to handle this.
If you're not familiar the feature, a Corridor can have multiple alignments defined as Baselines. Each will have its own design profile and assembly.
See the attached simple corridor with 90 degree corner.
I don't see the advantage of using a multi-baseline Corridor?
One baseline, and you would not have to monitor and update the common PVI across two profiles.
Here is a blog post of mine covering this
and a similar topic with sample drawing is here
Good show mate! Let's kick it up a notch.. A mitered interior corner cleanup for the intersection:
One corridor, one assembly, one profile...fully dynamic.
I like Fred's result as he is able to include cross secitons in the mitered area. Do you care to expound?
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.