AutoCAD Civil 3D General

Posts: 4
Registered: ‎07-21-2011
Message 1 of 3 (274 Views)

AECC Db Class Node 31C4 error

274 Views, 2 Replies
05-25-2012 01:54 PM

I'm in process of cleaning up an inherited drawing and I keep getting the following recurring 4 errors every time I audit or run a recovery. When I look through the recovery log I see the following note: "AECC Db Class Node 31C4 error". At the end of the recovery log it states the four errors are repaired -- but next time I audit there they are. Any ideas how to fid the drawing of this problem?

*Expert Elite*
Posts: 1,232
Registered: ‎09-05-2007
Message 2 of 3 (272 Views)

Re: AECC Db Class Node 31C4 error

05-25-2012 02:13 PM in reply to: Kayte

Do a -purge, the R for RegApps.

If the issue was resolved by this method, please click on "Accept As Solution"
*Civil 3DJ*
Todd Rogers

Visit my blog here.

Posts: 4
Registered: ‎07-21-2011
Message 3 of 3 (248 Views)

Re: AECC Db Class Node 31C4 error

05-28-2012 05:43 AM in reply to: TRogers
Thank-you, I gave this a try a couple of times and couldn't get rid of the errors. I should add that even though I selected R for Regapps the routine came back with 'no unreferenced visual styles found'. I then tried again and selected ALL and the routine came back with no unreferenced for every entity the -purge looks for *except* Regapps! I do appreciate your response however and will remember the -purge routine...I had used this in the past for some recalcitrant objects and had forgotten it. So thank-you. I'm open to any further suggestions if you have them.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community

Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D