AutoCAD Civil 3D General

Reply
Active Contributor
Posts: 43
Registered: ‎07-12-2012
Message 1 of 5 (285 Views)
Accepted Solution

ADD A TURN OUT ALONG A BIKE PATH CORRIDOR

285 Views, 4 Replies
10-29-2012 12:29 PM

I need to add a turnout (not intersection) along a bike path at a given station (see pdf attachment)

if I draw a turnout with nice arcs and lines, is there a way to add it to the corridor with extended

cross slope from the assembly at that point?

 

Thanks

 

John Wilson

Valued Contributor
bpoleuca
Posts: 55
Registered: ‎03-23-2007
Message 2 of 5 (282 Views)

Re: ADD A TURN OUT ALONG A BIKE PATH CORRIDOR

10-29-2012 12:55 PM in reply to: johnwilson0805

yes, it's possible.

You have to use a BasicLaneTransition.

Please use help for better explainance.

Good luck.

Active Contributor
Posts: 43
Registered: ‎07-12-2012
Message 3 of 5 (257 Views)

Re: ADD A TURN OUT ALONG A BIKE PATH CORRIDOR

10-29-2012 04:48 PM in reply to: bpoleuca

Thank you very much. It helped to research edit target to a polyline layout

 

John

*Expert Elite*
Neilw
Posts: 2,108
Registered: ‎09-04-2006
Message 4 of 5 (245 Views)

Re: ADD A TURN OUT ALONG A BIKE PATH CORRIDOR

10-29-2012 11:45 PM in reply to: johnwilson0805

While polylines can be used as targets they are static entities, so they don't move if your alignment changes. A better solution is to use offset alignments with widenings. Then you can move the widening along the baseline or edit it parametrically. You want a solution that is dynamic to changes to the design.

 

Also for a widening you should consider using an offset in your assembly so that your template will be perpendicular to the edge of pavement through the widening.

Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
http://www.sec-landmgt.com
Active Contributor
Posts: 43
Registered: ‎07-12-2012
Message 5 of 5 (186 Views)

Re: ADD A TURN OUT ALONG A BIKE PATH CORRIDOR

10-31-2012 06:47 AM in reply to: Neilw

Thanks Neil

 

I'll look imto that

 

John

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs