Re: 2015 Hydraflow "No Flow" error

Anonymous · ‎05-29-2014

"No Flow" message...see attached image, thanks.

ToddRogers-WPM · ‎05-29-2014

Provide a screen shot of the Pipes tab.

Todd Rogers

Joe-Bouza · ‎05-29-2014

That usually means you have no area or Tc in the junction. I see you have a MH and it shouldn't need it. - I saw this in 2014 a few days ago and just put a tiny area in it to get past the error.

Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

Anonymous · ‎06-03-2014

ccoles · ‎06-03-2014

It appears that Line 1 is running from outfall to outfall instead of from line 2 to outfall. And, Line 2 is running to an outfall instead of to Line 1. I believe your model is messed up and you may need to rebuild it from scratch.

Windows 7 64-bit
Dell Precision T5610, Dual-Xeon 2.6Ghz, 16 Gig RAM
Civil 3D 2013

Joe-Bouza · ‎06-03-2014

I could be wrong but if you tell hyraflow the junction is a grated inlet doesn't expect, A, i and Tc?

Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

2015 Hydraflow "No Flow" error

2015 Hydraflow "No Flow" error

Forums Links

Post to forums