AutoCAD Civil 3D General

Reply
*Expert Elite*
sboon
Posts: 1,949
Registered: ‎11-08-2005
Message 1 of 15 (1,063 Views)

2013 bug - corridor feature lines

1063 Views, 14 Replies
04-17-2012 11:00 AM

I have a road corridor with feature lines connecting the road edges (cyan), ditchline (dark green), daylight_cut (yellow), daylight_fill (green) and daylight (white).  At certain random locations along this corridor I am getting feature lines which span from one station to another, ignoring all of the corridor sections in between.  The image below shows a daylight_fill line spanning over 60m, even though there is a daylight line through this region.

 

Clipboard01.png

 

In this area a ditch line and a daylight_cut start at 4+110, skip over the next cut section at 4+120 and jump over a hundred meters to the next piece of ditch at 4+280

 

Clipboard02.png

 

This corridor builds clean - no error messages reported.  Is anybody else seeing this behaviour?

Employee
Posts: 1,261
Registered: ‎04-19-2006
Message 2 of 15 (1,049 Views)

Re: 2013 bug - corridor feature lines

04-17-2012 01:00 PM in reply to: sboon

Can you post the dwg? or a sample dwg?

Dana Probert, P.E.
Technical Marketing Manager, Civil Engineering
Autodesk
Blog: BIM on the Rocks
Learn More About BIM for Infrastructure
*Expert Elite*
sboon
Posts: 1,949
Registered: ‎11-08-2005
Message 3 of 15 (1,040 Views)

Re: 2013 bug - corridor feature lines

04-17-2012 01:23 PM in reply to: dana.probert

Not on a public board Dana, but PM me and I'll arrange to get it to you somehow.

Employee
Posts: 1,261
Registered: ‎04-19-2006
Message 4 of 15 (989 Views)

Re: 2013 bug - corridor feature lines

04-19-2012 11:17 AM in reply to: sboon

Can you make it fail in a tutorial or sample dwg?

 

You can email me the dwg if you like and I can see if I can get it looked at. First dot last at youknowwhere.com

Dana Probert, P.E.
Technical Marketing Manager, Civil Engineering
Autodesk
Blog: BIM on the Rocks
Learn More About BIM for Infrastructure
Distinguished Contributor
Posts: 260
Registered: ‎03-26-2008
Message 5 of 15 (976 Views)

Re: 2013 bug - corridor feature lines

04-19-2012 11:43 AM in reply to: sboon

In the Feature Lines tab of corridor properties...Does Branching Inward or Outward make a difference?

 

Brent

*Expert Elite*
sboon
Posts: 1,949
Registered: ‎11-08-2005
Message 6 of 15 (972 Views)

Re: 2013 bug - corridor feature lines

04-19-2012 11:55 AM in reply to: bigblittlerent

Nope.

Employee
Posts: 1,261
Registered: ‎04-19-2006
Message 7 of 15 (969 Views)

Re: 2013 bug - corridor feature lines

04-19-2012 11:57 AM in reply to: sboon

I know that you have probably checked this... but just looking at your screen capture, I have to ask.

 

Is there a corridor surface in your dwg with the border only display on?

Dana Probert, P.E.
Technical Marketing Manager, Civil Engineering
Autodesk
Blog: BIM on the Rocks
Learn More About BIM for Infrastructure
Distinguished Contributor
Posts: 260
Registered: ‎03-26-2008
Message 8 of 15 (968 Views)

Re: 2013 bug - corridor feature lines

04-19-2012 11:57 AM in reply to: sboon

Steve,

 

To answer your previous question...Yes, I saw this a few times...branching outward solved it for me a couple times.

 

Good luck.

 

Brent

*Expert Elite*
sboon
Posts: 1,949
Registered: ‎11-08-2005
Message 9 of 15 (964 Views)

Re: 2013 bug - corridor feature lines

04-19-2012 12:08 PM in reply to: dana.probert

No surface Dana.  The green lines are Daylight_Fill feature lines, the yellow ones are Daylight_Cut, and the white ones are Daylight codes.  The darker green ones parallel to the Daylight_Cut  are the Ditch codes.

Distinguished Contributor
Posts: 260
Registered: ‎03-26-2008
Message 10 of 15 (959 Views)

Re: 2013 bug - corridor feature lines

04-19-2012 12:16 PM in reply to: sboon

Steve,

 

Was the assembly built in 2013?...have had problems mixing subassemblies from different versions of software.

 

Brent

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs