AutoCAD Civil 3D Customization

Reply
Contributor
smarkel
Posts: 15
Registered: ‎11-30-2011
Message 1 of 4 (529 Views)

Custom Automatic Curve Widening?

529 Views, 3 Replies
10-22-2012 06:49 AM

Already posted this in the general C3D forum with no success, hopefully someone here can lend a thought...

 

I'm wondering if anyone out there has used a non-AASHTO curve widening formula to calculate automatic curve widening for an alignment?  I'm trying to use our Agency curve widening formula which is a function of curve radius and  central angle.  

 

I'm not sure if it is even possible to use the central angle of the curve for calculating widening, or how one would go about using a non-AASHTO CW formula.  Does anyone have any thoughts here?

 

Attached is the curve widening formula that needs to be used.  L will be a constant here.

 

Thanks in advance

Distinguished Mentor
andrewpuller3811
Posts: 762
Registered: ‎07-30-2008
Message 2 of 4 (525 Views)

Re: Custom Automatic Curve Widening?

10-22-2012 07:46 AM in reply to: smarkel

Have a look into the file "_Autodesk Civi l 3D Roadway Design Standards.xsd" located here "C:\ProgramData\Autodesk\C3D 2013\enu\Data\Corridor Design Standards" for civil 3d 2013, (C:\ProgramData\Autodesk\C3D 2012\enu\Data\Corridor Design Standards for 2012) and the file " _Autodesk Civil 3D Imperial Roadway Design Standards.xml" located here C:\ProgramData\Autodesk\C3D 2013\enu\Data\Corridor Design Standards\Imperial.

 

In the second file you will find the section on widening methods which explains the variables available for use, and gives an example of widening by formula and also by table. It shows the "AASHTO Simple Formula" and "AASHTO Standard Formula"

 

I would make a copy of this file and edit the copy to create a new widening method (using a name you like) based on your formula.

 

The first file specifies how the standards file is constructed and what pieces are required or optional.

 

 

 

If this fixed your issue, click on "Accept as Solution"

Andrew Puller
Maitland, NSW, Australia
Windows 7 Enterprise 64bit
Intel core i7 2600 @ 3.40 GHz with 16GB Ram
Civil 3d 2013 64bit
Contributor
smarkel
Posts: 15
Registered: ‎11-30-2011
Message 3 of 4 (509 Views)

Re: Custom Automatic Curve Widening?

10-23-2012 07:21 AM in reply to: andrewpuller3811

This makes sense that one would want to make changes to this file to modify the curve widening formula.  However, I need to be using a formula based on different variable than are defined in the file.  Specifically I need to be using the Central Angle and Radius of the curve.  Radius is defined as an available variable, however central angle is not.  I'm not sure if it would even be possible to define a new variable by modifying this file.  Is this possible?  If so how would you want to go about it?

Distinguished Mentor
andrewpuller3811
Posts: 762
Registered: ‎07-30-2008
Message 4 of 4 (494 Views)

Re: Custom Automatic Curve Widening?

10-24-2012 05:30 AM in reply to: smarkel

I think this is a question to throw at autodesk.

If this fixed your issue, click on "Accept as Solution"

Andrew Puller
Maitland, NSW, Australia
Windows 7 Enterprise 64bit
Intel core i7 2600 @ 3.40 GHz with 16GB Ram
Civil 3d 2013 64bit

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs