PushPin control

[Anonymous]

What controls the pushpin for the Aec Dialogs.

Since all commands show the dialog there is no JUST COMMAND line version so
I would like to temporarily turn off the rolldown of the dialog. I have
looked in the registry everywhere. I may just be blink from working too
hard.

I could either do that or modify the left and top of the dialog to be off
the screen. I really don't want to do that.

Thanks for the info.

--
-------------------------------------------------------------------------
Rob Starz
Plogv 3.0 & 2000 (plot logging) for r14 & 2000
***Enhancement Tools for Arch. Desktop *****
!!!! DormerX out in Sept !!!!
http://www.stardsign.com/main.htm

[Anonymous]

Rob

Assumming you have the setting such that all Add dialogs use the same
registry setting, look in
\\HKCU\Software\Autodesk\R15.0\ACAD-12:409\Profiles\\Dialogs\Common
-AddObjDialog\Pinned

Value = 1 (DWORD) if rollup is disabled

hope this helps

--
mark webb
software engineer
building industry division, autodesk inc

[Anonymous]

that did it.

thanks.

--
-------------------------------------------------------------------------
Rob Starz
Plogv 3.0 & 2000 (plot logging) for r14 & 2000
***Enhancement Tools for Arch. Desktop *****
!!!! DormerX out in Sept !!!!
http://www.stardsign.com/main.htm
"mark webb, autodesk" wrote in message
news:6D1951A1B2C081B79A5899C133BCD740@in.WebX.maYIadrTaRb...
> Rob
>
> Assumming you have the setting such that all Add dialogs use the same
> registry setting, look in
>
\\HKCU\Software\Autodesk\R15.0\ACAD-12:409\Profiles\\Dialogs\Common
> -AddObjDialog\Pinned
>
> Value = 1 (DWORD) if rollup is disabled
>
> hope this helps
>
> --
> mark webb
> software engineer
> building industry division, autodesk inc
>
>
>