Drawing-text Scale

[Anonymous]

Hey All:

I am beating my head against a wall! I have been trying to set up my
compaines CAD standards and I want my text style to be scaled up and down
through the "drawing setup" scale toolbar. The problem I have is that I
cannot set it up. Everytime I place text in model space, it puts it in at
1/8", making it extremely small and it will not automatically adjust when I
change the scale in Drawing Set-up. Any help would be greatly appreciacted.

Thank you,

Stephen Rigor

[Anonymous]

Are you looking for a routine to use with MTEXT,DTEXT, Leaders..... ?

Or ADT stuff?

--
Rob Starz
StarDsign@aol.com
Plogv 3.0 (plot logging) for r14 Updated release!!!
Plogv2000 (plot logging) for 2000 New release!!!
ADT Curtainwall Suite NOW AVAILABLE!!!
ADT Toilet Suite!!! coming soon.
***Tools for Architectural Desktop coming soon**
http://members.aol.com/stardsign/index.htm <
StarDsign cad solution

[Anonymous]

Just to make sure. You are entering what you want to make the plotted
scale at in the Drawing Scale dialog box. It is to the right of all the
scale listings.

Kevin

Stephen Rigor wrote:
>
> Hey All:
>
> I am beating my head against a wall! I have been trying to set up my
> compaines CAD standards and I want my text style to be scaled up and down
> through the "drawing setup" scale toolbar. The problem I have is that I
> cannot set it up. Everytime I place text in model space, it puts it in at
> 1/8", making it extremely small and it will not automatically adjust when I
> change the scale in Drawing Set-up. Any help would be greatly appreciacted.
>
> Thank you,
>
> Stephen Rigor

[Anonymous]

Stephen,
When you place text nto a drawing it uses the current text style set. Go
into the style command and create or select the style you wish to use, make
sure all the values are correct and then exit from the dialogue box
correctly. Now when you type new text to the drawing it should appear based
on the current style setup. This value is also saved when you exit the
drawing and is current when you open that drawing again.

Bob

Stephen Rigor wrote in message
news:80v0r5$qt627@adesknews2.autodesk.com...
> Hey All:
>
> I am beating my head against a wall! I have been trying to set up my
> compaines CAD standards and I want my text style to be scaled up and down
> through the "drawing setup" scale toolbar. The problem I have is that I
> cannot set it up. Everytime I place text in model space, it puts it in at
> 1/8", making it extremely small and it will not automatically adjust when
I
> change the scale in Drawing Set-up. Any help would be greatly
appreciacted.
>
> Thank you,
>
> Stephen Rigor
>
>
>
>