AutoCAD Architecture Forum
Welcome to Autodesk’s AutoCAD Architecture Forums. Share your knowledge, ask questions, and explore popular AutoCAD Architecture topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Wide polyline shows as lines

6 REPLIES 6
Reply
Message 1 of 7
angelique172
1716 Views, 6 Replies

Wide polyline shows as lines

Hi. I'm using a block with thick polylines. When i copy it to another drawing the thickness does'nt show anymore, only the contours drawn in thin lines.

 

How do I get my wide polylines to show correctly? Is there a setting I should know about?

 

I'm attaching an image of the block the way it should look, and one of how it looks when I paste it in drawning no 2.

 

Thank you,

 

/a172

6 REPLIES 6
Message 2 of 7
pendean
in reply to: angelique172

A layer turned off/frozen perhaps?

Or LWEIGHT setting bylayer is different between the two files?

 

Message 3 of 7
David_W_Koch
in reply to: angelique172

Is FILLMODE set to 0?  If so, set it to 1 and regenerate the drawing.  (You can also use the FILL command, and choose the ON option.  You will still need to regenerate the drawing to see the change.)


David Koch
AutoCAD Architecture and Revit User
Blog | LinkedIn
EESignature

Message 4 of 7
angelique172
in reply to: angelique172

FILLMODE and FILL are set to 1 in both drawings.

Message 5 of 7
David_W_Koch
in reply to: angelique172

Are you viewing in 2D Wireframe?


David Koch
AutoCAD Architecture and Revit User
Blog | LinkedIn
EESignature

Message 6 of 7
David_Knight
in reply to: David_W_Koch

check your USC.

 

 

usc -> world

 

looks like it might be rotated a hair (like 0.1%) had it happen when i drag my middle mouse a hair by mistake.

Message 7 of 7
longoriaos
in reply to: angelique172

Go to View tab and change your view to 2d Wirefame.

You must be on 3D Wireframe

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost