Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I am new to ACA. I am currently working on 3D model of a 2bedroom bungalow. In it I have a Porch, Living room, Dinning room, Kitcchen, two bedrooms, toilet. The problem I have is how to create the slab to show the Porch at 750mm, living room at 450mm, Dinning room at 750mm & bedrooms at 600mm? All on ground floor level. Also so it shows properly on section view. Help me plz cos there are no video tutorials on this.
Any reason why you can't draw them as separate slabs and give them appropriate elevations (using the TOP or BOTTOM values, depending on how your slab style's defined).
The trick will be selecting a suitable CUT PLANE. A value of 1800-2100 would equate to 1350-1650 in the dining room and bedrooms and 1050-1350 which *should* work for both levels.
