I need to find out how to scale out these drawings. I have a CAD drawing using metric scale. This drawing has multiple title blocks. and each title block has its own scale. 1:500, 1:50, 1:150, 1:75. Now I make a block out of each title block and scale them out to find out if they plot out on the same sheet, and they do. Now, I still can't find out the scale factor to print them out to scale. I tried using using the scale shown in for each drawing for example 1:500 and it is super small when I do a print preview. Can someone help me figure this out please???
Wow. Too many variables to discuss here.
First thing... If possible use paperspace. Place the border in paperspace at a scale of 1. Make a viewport and scale the viewport. Print paperspace to a scale of 1:1 (or 1:2 if doing half size prints).
Next, what are your physical paper sizes? If you are trying to print metric drawings to ANSI or ARCH paper sizes then there are metric to imperial scaling issues to think about. Generally 1:25.4 or similar.
IN MODEL space the title block for 1:500 scale is drawn out at 441.501m X 294.334m , and the title block for 1:50 is drawn out at 44.5m X 33.5m.
i NEED to print out in size 24"x36." I assume they scaled the drawings to print on a size A1, so I'm printing on a size A1 sheet. You are right. when I preview I cant get the right scale factor. the drawings are from mexico and I'm in the US, California.
That's the ticket, then. You are trying to print metric scales and paper sizes to Imperial paper sizes.
So, you need to figure out what size metric border is closest to your 24x36 paper.
I know when I print A1 to our usual ANSI D (22x34) I have to print to a scale of 1:25.4 from paperspace.
If you are printing from Modelspace, then multiply your scale by 25.4 (or divide... whichever it is... can't really think right now, at home with migraine.) It may be another metric to imperial scale factor, but usually you will be going from millimeters to inches for the paper sizes. If you are want a printed scale of 1:500 on a 24x36" paper, then you will really be printing 1:19.685, not 1:500. Unless you just actually go and buy a roll of metric sized paper and let the printer know that's what you're printing to.
Some fun, eh?
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.