Link two points

construccion777 · ‎07-23-2012

There are to points and between them a lot of obtructions therefore there is not possible to link using only ome line. Is there a command to link ?

grimline · ‎11-16-2003

PLINE command

AutoCAD Map 3D 2013
Windows Vista Business
Service Pack 2
Intel(R) Core(tm2) Quad 3.0 GHz
4.0 GB RAM

construccion777 · ‎07-23-2012

Yes but you have to define the path . I am looking for an automatic method . This is very usefull to design circuits.

dbroad · ‎08-16-2007

You'd have to investigate available verticals or third party apps.. Automatic routing is not available in Autocad base.

JDMather · ‎04-20-2006

Are you familiar with parametric geometry constraints?

Post an example file here.
Might be as simple as coincident constraint.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2013 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2013 SP 1.1 Edu 64-bit
GeForce GTX 560M i7-2670QM @ 2.2GHz 8GB RAM
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
http://www.autodesk.com/edcommunity
Still waiting for -Draft option on any Rib feature.

construccion777 · ‎07-23-2012

Thank you I will check the example

AutoCAD 2013/2014 DWG Format

Link two points

Re: Link two points

Re: Link two points

Re: Link two points

Re: Link two points

Re: Link two points