AutoCAD 2013/2014/2015

Reply
Active Member
nathalia.sautchuk
Posts: 9
Registered: ‎01-05-2012
Message 1 of 6 (2,949 Views)
Accepted Solution

Strange Problem with AutoCAD 2013

2949 Views, 5 Replies
04-25-2012 07:44 AM

I'm with problems with AutoCAD 2013. I have a student license. When I open some dwg archives and select some lines appear something very strange, not usual in other versions. See below:

 

autocad.png

 

Is it normal in AutoCAD 2013? Does anyone have a idea how I can deactivate it?

 

I'm with another problem too. I select a entire plant and move it. The dimension line is stretched between the old position and the new in the drawing. Does anyone heve this problem? How can I eliminate that?

 

Any suggestion will be useful. 

Distinguished Contributor
lovecraft
Posts: 133
Registered: ‎10-07-2008
Message 2 of 6 (2,941 Views)

Re: Strange Problem with AutoCAD 2013

04-25-2012 08:07 AM in reply to: nathalia.sautchuk

Those icons are indicating that there are constraints applied to all of the objects associated with them.  You can run the DELCONSTRAINT command and eliminate them if you have no further use for them.  In the future, if you won't be using constraints at all, set the CCONSTRAINTFORM system variable to "1".

Distinguished Contributor
lovecraft
Posts: 133
Registered: ‎10-07-2008
Message 3 of 6 (2,938 Views)

Re: Strange Problem with AutoCAD 2013

04-25-2012 08:09 AM in reply to: lovecraft

Also, the dimensions which are associative, are updating based on the new positions of those objects.  I think you will find this very useful, in general, once you get used to it.  If you don't want this behavior, you should look into the different settings for DIMASSOC.

Valued Contributor
mmelechinsky
Posts: 63
Registered: ‎03-26-2004
Message 4 of 6 (2,881 Views)

Re: Strange Problem with AutoCAD 2013

04-26-2012 04:33 AM in reply to: nathalia.sautchuk

_constraintinfer = 0

 

This is all you need do.

Active Member
nathalia.sautchuk
Posts: 9
Registered: ‎01-05-2012
Message 5 of 6 (2,863 Views)

Re: Strange Problem with AutoCAD 2013

04-26-2012 05:53 AM in reply to: lovecraft

Thanks! This command DELCONSTRAINT solve my problem... So simply!

Distinguished Contributor
lovecraft
Posts: 133
Registered: ‎10-07-2008
Message 6 of 6 (2,857 Views)

Re: Strange Problem with AutoCAD 2013

04-26-2012 06:40 AM in reply to: nathalia.sautchuk

mmelechinsky is right about the CONSTRAINTINFER system variable.  That is what you should do to make sure you suppress this function in future drawings if that is your method and you have no use for constraints.  As this person indicated, set it to "0" to avoid applying constraints.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements

    Come hangout with Autodesk Support Specialist and AutoCAD guru Volker Cocco, to learn about Precision Drafting: Object Snaps and Object Tracking on July 31 @ 11:00 AM PST.

    Click here for registration information!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community




Connect with AutoCAD

Twitter

Facebook

Blogs

Pinterest

Youtube