Having trouble printing my 3d model in paper space

[Anonymous]

I am having a problem with all of my lines showing up on my prints when printing a 3D model. When I do a print preview, all of my lines show up but when I print to an actual sheet of paper or to PDF, the lines do not show up.

See attachments.

[s.lawrence]

I've had this trouble for years, it's common in MEP too with pipes, ducts etc going missing. There are other threads on the forums about it but have never come to a foregone conclusion. HIDEPRECISION helps but it is an annoyance which I hope will be dealt with one day. Unless anybody has any other advice?

[Anonymous]

I did try the HIDEPRECISION command but found it didn't help. I had a couple co-workers print the model out and it printed just fine. I think I have a setting that I am missing but just can't find figure it out yet. Thanks anyway.

[nestly2]

Maybe try  DISPSILH = 1

[Anonymous]

Unfortunately DISPSILH = 1 didn't work either.

[Anonymous · Accepted solution]

HIDEPRECISION is one thing, and it's good that you chaged that to "1", but you might also try
INTERSECTIONDISPLAY and change that to "1" also. 

Does that help?

[nestly2]

I have had better luck printing 3D hidden from Modelspace than Paperspace layouts.

Would you mind attaching a sample drawing?

[Anonymous]

INTERSECTIONDISPLAY set to <on> worked. Thanks for the help.