AutoCAD 2013/2014/2015

Reply
*Expert Elite*
Alfred.NESWADBA
Posts: 8,866
Registered: ‎06-29-2007
Message 11 of 29 (2,367 Views)

Re: [HELP!] can't start Autocad 2014

05-09-2013 10:45 AM in reply to: mweiss34

Hi,

 

what have you tried from the above suggestions?

 

- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
Contributor
giogacang
Posts: 15
Registered: ‎04-27-2013
Message 12 of 29 (2,361 Views)

Re: [HELP!] can't start Autocad 2014

05-09-2013 12:09 PM in reply to: mweiss34

try downloading dependency walker

http://www.dependencywalker.com/

then try following the steps on how to use it with this

http://msoos.wordpress.com/2010/09/11/0xc000007b-error-solution/


I'm using it right now on may Subject " CadDraft " no
problem so far except school's using paid version of 2005
and I'm using 2014 way too different interface
I need to turn it back to Autocad clasic just to tune in with my
class. .

 

Active Member
mweiss34
Posts: 7
Registered: ‎05-07-2013
Message 13 of 29 (2,347 Views)

Re: [HELP!] can't start Autocad 2014

05-09-2013 12:53 PM in reply to: Alfred.NESWADBA

Ok so I download Dependency Walker.  I see MSVCR100.dll is in red so do I delete that from the files to listed above and then try to reinstall AutoCAD 2014.  These are the names files that listed as error

 

API-MS-WIN-CORE-COM-L1-1-0.DLL
API-MS-WIN-CORE-WINRT-ERROR-L1-1-0.DLL
API-MS-WIN-CORE-WINRT-L1-1-0.DLL
API-MS-WIN-CORE-WINRT-ROBUFFER-L1-1-0.DLL
API-MS-WIN-CORE-WINRT-STRING-L1-1-0.DLL
API-MS-WIN-SHCORE-SCALING-L1-1-0.DLL
DCOMP.DLL
GPSVC.DLL
IESHIMS.DLL
REGISTERTODAY.DLL

When I search the path it led to the MSVCR100.dll.

 

 

Contributor
giogacang
Posts: 15
Registered: ‎04-27-2013
Message 14 of 29 (2,335 Views)

Re: [HELP!] can't start Autocad 2014

05-09-2013 02:05 PM in reply to: mweiss34

here's you gotta do follow the steps correctly ok?. .

1.delete " MSVCR100.dll " both in this dir:
" C:\Windows\System32 " & " C:\Windows\SysWOW64
btw are you using 64 bit?. . [if yes do this]

2. Go to Control Panel> Programs and features:
uninstall both:
Microsoft Visual C++ Redistributable 2010(x86)
Microsoft Visual C++ Redistributable 2010(x64)

 

3. Uninstall all autodesk software Follow this to uninstall completely:
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=2887771&linkID=9240617

4. Download CCleaner
http://www.piriform.com/ccleaner/download
Install.
run Registry fix and Cleaner.

5. reboot PC

6. try fresh install again, and hope for the best.
We had the same problem and I solved it by this method.

PLEASE FOLLOW IT THOROUGHLY.
Don't miss even one instruction. especially on uninstalling it completely
so that your time would not be of waste, and GOOD LUCK too
you might need it. .

New Member
simonveitch
Posts: 2
Registered: ‎07-22-2013
Message 15 of 29 (2,095 Views)

Re: [HELP!] can't start Autocad 2014

07-22-2013 05:07 PM in reply to: giogacang

Yes. That worked for me. A good analysis and fix. Thank you.

New Member
fc43698
Posts: 2
Registered: ‎09-29-2013
Message 16 of 29 (1,725 Views)

Re: [HELP!] can't start Autocad 2014

09-29-2013 02:52 PM in reply to: Alfred.NESWADBA

Hi!

 

I'm having the same problem, I have installed AutoCAD 2014 and when I run it there's an error. 

I've read the solutions and I'll try them, I  just would like to know if the files I'm going to delete and uninstall (Microsoft Visual C++ Redistributable 2010(x86)Microsoft Visual C++ Redistributable 2010(x64) and MSVCR100.dll) are important for my PC and if deleting them is going to affect its performance in any way?

 

Thanks,

Patrícia.

Contributor
giogacang
Posts: 15
Registered: ‎04-27-2013
Message 17 of 29 (1,652 Views)

Re: [HELP!] can't start Autocad 2014

10-11-2013 09:59 PM in reply to: Alfred.NESWADBA

 MSVCR100.dll and redistributable 2010 are important in many ways in the PC
but you need to follow my instructions thoroughly and avoid unnecessary mistake.

you need to reinstall it, but first delete the thing that I mention for a clean re-install. .

 

New Member
fc43698
Posts: 2
Registered: ‎09-29-2013
Message 18 of 29 (1,640 Views)

Re: [HELP!] can't start Autocad 2014

10-12-2013 05:09 AM in reply to: giogacang

Thanks for the reply, but after all the only thing I had to do to make AutoCAD work was install some updates from Windows and it worked perfectly :smileywink:

Member
le.zhang
Posts: 5
Registered: ‎10-17-2013
Message 19 of 29 (1,607 Views)

Re: [HELP!] can't start Autocad 2014

10-17-2013 10:49 PM in reply to: giogacang

i just upgraded win8 pro to win8.1pro, but cannot run autocad 2014, 3d max 2014 or revit 2013.

 

does anyone can help me

*Expert Elite*
Alfred.NESWADBA
Posts: 8,866
Registered: ‎06-29-2007
Message 20 of 29 (1,602 Views)

Re: [HELP!] can't start Autocad 2014

10-17-2013 11:01 PM in reply to: le.zhang

Hi,

 

>> i just upgraded win8 pro to win8.1pro, but cannot run autocad 2014, 3d max 2014 or revit 2013.

Have these products worked before you updatet to 8.1?

 

- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community




Connect with AutoCAD

Twitter

Facebook

Blogs

Pinterest

Youtube