AutoCAD 2013/2014/2015

Reply
New Member
lufou12
Posts: 2
Registered: ‎02-14-2013
Message 1 of 8 (829 Views)

Autocad 3d modeling Pyramid

829 Views, 7 Replies
02-14-2013 03:47 PM

Can I make a pyramid has a rectanglular base instead of a square?  

Mentor
grimline
Posts: 207
Registered: ‎11-16-2003
Message 2 of 8 (812 Views)

Re: Autocad 3d modeling Pyramid

02-14-2013 04:57 PM in reply to: lufou12

command: PYRAMID

 

then it'll ask you for sides. input 3.

Autodesk AutoCAD Map 3D 2015
Windows 7 Professional
Service Pack 1
Intel(R) Core(TM) i5-4430 CPU @ 3.00 GHz
8.00 GB RAM
*Expert Elite*
Patchy
Posts: 6,207
Registered: ‎09-16-2009
Message 3 of 8 (801 Views)

Re: Autocad 3d modeling Pyramid

02-14-2013 05:45 PM in reply to: lufou12

Loft it with a point.

Like in the video

 

New Member
lufou12
Posts: 2
Registered: ‎02-14-2013
Message 4 of 8 (784 Views)

Re: Autocad 3d modeling Pyramid

02-14-2013 08:07 PM in reply to: Patchy

Thanks for the help.  I ended up using a polyline rectangle then extruding it using a taper.  

*Expert Elite*
GrantsPirate
Posts: 1,546
Registered: ‎08-15-2008
Message 5 of 8 (764 Views)

Re: Autocad 3d modeling Pyramid

02-15-2013 07:18 AM in reply to: lufou12

Use the pyramid command to make a square base, after finished with the command, hold Ctrl and pick the midpoint of a base line, stretch the distance needed, escape, hold Ctrl and pick the top of the pyramid, stretch that half the previous distance.

*Expert Elite*
JDMather
Posts: 26,141
Registered: ‎04-20-2006
Message 6 of 8 (751 Views)

Re: Autocad 3d modeling Pyramid

02-15-2013 10:02 AM in reply to: GrantsPirate

that sounds like a lot of work.

I think I'll stick with Loft to Point.

No calculations needed.
No editing needed.

I'm kind of lazy.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
GrantsPirate
Posts: 1,546
Registered: ‎08-15-2008
Message 7 of 8 (745 Views)

Re: Autocad 3d modeling Pyramid

02-15-2013 10:35 AM in reply to: lufou12

Same amount of work, and I like the huge challenge of dividing by 2.

 

Here's an idea, in the future just suggest your own solution, no need to critique other's.

*Expert Elite*
JDMather
Posts: 26,141
Registered: ‎04-20-2006
Message 8 of 8 (723 Views)

Re: Autocad 3d modeling Pyramid

02-16-2013 04:57 AM in reply to: GrantsPirate

COJonez wrote:

Here's an idea, in the future just suggest your own solution, no need to critique other's.


I don't know if I met you before or if you are someone important here.
I can only assume by your response that I offended you.
I simply don't care, so I will continue to offer critique and opinion where I feel appropriate.

 

If you are offended by a post there is a mechanism here to report inappropriate content

offended.png

 

The  Loft command is a general solution that can be used to solve a problem of the type described by the OP for nearly any base profile shape.

 

In my opinion you have raised a more fundamental concern - the censorship of critique.

 

While this site might not be the appropriate forum to raise opinions or critique all of human concerns, it would be a less useful forum, in my opinion, if discussion of CAD techinques and preferences were censored here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community




Connect with AutoCAD

Twitter

Facebook

Blogs

Pinterest

Youtube