Arrowheads not filled

[1Fabricator]

Every month or so one of my AUtoCad 2014 files will not keep its arrowheads filled. The DIMSTYL setting is set as filled. But, my dims. and leaders loose their fill when I use grips to adjust them. And most of the time I'm not doing anything; and they 'go blank'. Only closing and reopening the drawing seems to work; but only temporarily.

                              Thanks for any help, LL

[pendean · Accepted solution]

HIDE can do that: so can your chosen plot visual style settings and UCS orientation. AFAIK most likely you restarting the drawing involves the relevant presets to get, well, reset. Or your video card is getting beat up by 2014 that it chokes after some use.

"temporary" problems require you to dig a lot deeper to find a trigger or culprit.

[1Fabricator]

Thanks for the leads. I'll keep digging.

[1Fabricator]

I still can't find the error. And since I've found a work around for when this issue occures, I'll just call this solved. Thanks!

[drjohn]

Random thought:

FILL  on?

Regards,

DJ

[waynebystrom]

Thanks, that solved MY problem.