AutoCAD 2010/2011/2012

Reply
Active Member
tbecker1
Posts: 9
Registered: ‎01-15-2013
Message 1 of 6 (224 Views)

creating a place to insert blocks

224 Views, 5 Replies
01-15-2013 04:21 PM

I worked with about 70 blocks that I routinely insert in drawings, at present I have an area where I keep all them in every drawing.  I would like to have a bar that will contain the blocks where I can drag and drop them into place.

 

Thank you for any assistance

 

Valued Mentor
tschau3
Posts: 504
Registered: ‎10-04-2007
Message 2 of 6 (220 Views)

Re: creating a place to insert blocks

01-15-2013 04:47 PM in reply to: tbecker1

You can do this with Design Center:

 

Type ADCENTER at the command line, or Ctrl+2. 

 

Navigate to your drawing, on "Blocks" right click and select "Create tool palette".

Active Member
tbecker1
Posts: 9
Registered: ‎01-15-2013
Message 3 of 6 (205 Views)

Re: creating a place to insert blocks

01-15-2013 08:09 PM in reply to: tschau3

thank you very much, I'll let you know how it comes out.

 

*Pro
murray-clack
Posts: 1,797
Registered: ‎12-08-2003
Message 4 of 6 (183 Views)

Re: creating a place to insert blocks

01-16-2013 04:31 AM in reply to: tbecker1

You may also want to look into using Tool Palettes because you be able to create separate tabs for individual topics, like, a tab for Title-sheets, a tab for Annotation symbols, a tab for each discipline-specific symbology

Active Member
tbecker1
Posts: 9
Registered: ‎01-15-2013
Message 5 of 6 (175 Views)

Re: creating a place to insert blocks

01-16-2013 05:56 AM in reply to: murray-clack
Can you assist, or point me in the right direction. Thank you Thomas
*Pro
murray-clack
Posts: 1,797
Registered: ‎12-08-2003
Message 6 of 6 (174 Views)

Re: creating a place to insert blocks

01-16-2013 05:58 AM in reply to: tbecker1

Attached is a tutorial I created for my company on how to create Tool Palettes.  Let me know if it was helpful/useful.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements

    Come hangout with Autodesk Support Specialist and AutoCAD guru Volker Cocco, to learn about Precision Drafting: Object Snaps and Object Tracking on July 31 @ 11:00 AM PST.

    Click here for registration information!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Connect with AutoCAD

Twitter

Facebook

Blogs

Pinterest

Youtube