Hi, I have a problem everytime I hatch in Autocad 2011 drawing with a x-ref.
If I do it on top of the xref it copies the x-ref file into the drawing as a block and explodes the block.
So now I have the x-ref file still attached and a block of the x-ref on top of it exploded which objects do not belong to any layer at all and that I have to delete one by one.
Any clues about it?
When I hatch on xrefs (and this is just how I do it, not necessarily the "proper" way) I will always draw a new object (usually a polyline object) on its own layer in the drawing on top of the xref. Then, when I want to hatch I select that object to hatch... not an area or object on the xref itself.
Not sure if this will make a difference in your case, but it's worth a shot.
Interesting. Does this happen with every xref you use or is it just with a particular file? Can you create a simple "attachment" file, save it, and open another host file to attach it to and reproduce the problem? Try that and see what happens. If it does, upload the two files here so we can have a look.
Hi Dave; thanks for your answer and sorry that took me long to reply. Unfortunately, we have eliminated that file in the office, and created a new one from zero. But I have a new file that makes weird things too: if you want to hatch on top of the xref, it "detects" all layers from the x-ref file that i have turned off, it showes them, and then they dissappear, and as a final result, I get a hatch that mimics the shape of the objects from the xref file.
Take a look at the screenshots while I perform this operation.
01-Making a simple rectangle to hatch
02-Selecting a pick point (look at the shape of the hatch preview)
03-This is the moment when the problem occurs. All the objects from the xref file appear.
It could happen this, or it could happen that all the objects that you can see in image three, they are now "pasted" in my new drawing and belong to no layer...(those are objects from the xref file as I told you).
In this case, the drawing is different and the xref is another file. They are very clean, very light, very simple. no reason for something like this.
What do you think?
Thanks in advanced.
I just made a post yesterday of a similar problem. My theory is that hatches pick up on all elements of a drawing, so that includes things that are hidden. If you put an xref in your drawing and xclip it, for example, your hatch will reveal the entire clipped drawing while you are selecting your elements to hatch. When you're done your hatch selections, the "revealed" aspects go away like normal. Unfortunately, this sometimes means there are more boundaries than you need. To get around this, I had to "unload" the xref (I made poly lines around the areas I needed to hatch), do my hatches like usual.
In my other post, I also came accross a problem where my hatches weren't detecting islands on one floor plan, but working fine on another. Still haven't sorted that one out.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register