AutoCAD 2010/2011/2012

Reply
Member
ClaytonP
Posts: 5
Registered: ‎01-16-2012
Message 1 of 4 (774 Views)

Missing Language Packs

774 Views, 3 Replies
12-04-2012 06:18 PM

Hi all,

 

I recieve an error message upon loading a particular file and I would like help to rectify the problem

 

The error message is the one that talks about TS13717811 knowledge base virus.  It says it's looking for Japanese, Korean, Traditional Chinese and Simplified Chinese.

 

I did a search on the pc for acad.vlx, didn't find it, it's also only one file, and when I open the drawing, all the text is there and works.  Also to further prove that it wasn't the virus I copied everything out, and placed it in to a new drawing and the error message doesn't appear on the new file.

 

So I believe it's not a the virus.  But somthing specific to that file, now once I open the drawing I am unable to find any errors with the drawing also I am unable to find what is pointing to these language packs.  There is no erros in STYLE, also after doing a PURGE and an AUDIT I am still unable to find the error.

 

So what I am after is #1 confirmation that my assumption about the virus is correct and #2 how to locate what is pointing to these language packs so I can manually remove it, as obviously the purge was unable to do that.

 

Also looking for the same to find SHX files that are unable to be found, cause no errors and yet are unable to be found or purged

 

Thanking you all in advance, Clayton

Active Contributor
Posts: 32
Registered: ‎05-14-2012
Message 2 of 4 (762 Views)

Re: Missing Language Packs

12-04-2012 06:49 PM in reply to: ClaytonP

You could try saving to dxf and see if problems persist, if they don’t save back to dwg.

 

Alternately wblock out the model space elements then import the layouts into the newly created file.

 

 

_________________________________________________________________

KarelCAD Application Support Specialist
*Expert Elite*
dgorsman
Posts: 4,710
Registered: ‎10-12-2006
Message 3 of 4 (737 Views)

Re: Missing Language Packs

12-05-2012 11:18 AM in reply to: ClaytonP

Not necessarily an error in the file.  Some data can hang around in the drawing data dictionaries, which can include non-english characters.  This can come from AEC content in other drawings that are inserted or XREF'd to the current drawing as well as some XDATA, so its very easy to spread.  About the only way I know to get rid of it is to nuke the file down to the bedrock, exporting/saving down to the earliest version possible.  Unfortuneately that can also mess with drawing content.  You *might* be able to take an ASCII DXF copy and manually strip out the offending data.

 

SHX references could be for shapes used by line types, directly inserted into the drawing, or are part of a block definition, not just AutoCAD fonts.

----------------------------------
If you are going to fly by the seat of your pants, expect friction burns.
Adopt. Adapt. Overcome. Or be overcome.
A good question will be halfway to a good answer.


Member
ClaytonP
Posts: 5
Registered: ‎01-16-2012
Message 4 of 4 (731 Views)

Re: Missing Language Packs

12-05-2012 12:01 PM in reply to: ClaytonP

Thanks guys,

 

So in short the answer is there is no answer except to do what I have done?

 

That's a bit disappointing, but thank you anyways

 

Clayton

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community




Connect with AutoCAD

Twitter

Facebook

Blogs

Pinterest

Youtube