AutoCAD 2010/2011/2012

Reply
Member
Posts: 4
Registered: ‎05-24-2010
Message 1 of 5 (1,076 Views)

Help Required in making holes on a curved surface in AUTOCAD 2011

1076 Views, 4 Replies
05-24-2010 02:28 AM
Hi ,
Please help me out anyone,I am facing problems in my project work.
1)I am required to drill holes in a thin curved conical surface.
2)the axis of the holes should be perpendicular to the surface.
3)This has to be done using Autocad 2011 3D.
I am nearing my dead line, so plss someone help me out.
Thank you.
*Dennis Jeffrey
Message 2 of 5 (1,076 Views)

Re: Help Required in making holes on a curved surface in AUTOCAD 2011

06-01-2010 05:13 AM in reply to: varunkrr
Wrong Discussion Group:

http://discussion.autodesk.com/forums/category.jspa?categoryID=8
--
Dennis Jeffrey, Autodesk Inventor Certified Expert

Subscribe to the free "The Creative Inventor Magazine now available at:
http://teknigroup.com/CI-Subscribe-Login.asp
Valued Mentor
Posts: 470
Registered: ‎01-04-2008
Message 3 of 5 (1,076 Views)

Re: Help Required in making holes on a curved surface in AUTOCAD 2011

06-02-2010 09:08 PM in reply to: varunkrr
that depends if your existing model is mesh or 3d solid .
if 3d solid , this can easily be done by creating a 3d solid cylinder and subtract it from your model .
*Expert Elite*
Posts: 25,283
Registered: ‎04-20-2006
Message 4 of 5 (1,076 Views)

Re: Help Required in making holes on a curved surface in AUTOCAD 2011

06-03-2010 03:52 AM in reply to: varunkrr
rectangle at right angle to your cone face
revolve the rectangle as cylinder
subtract

or

line perpendicular to your cone
ucs za o
circle
presspull
or
extrude and subtract
Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
Posts: 25,283
Registered: ‎04-20-2006
Message 5 of 5 (1,076 Views)

Re: Help Required in making holes on a curved surface in AUTOCAD 2011

06-03-2010 03:52 AM in reply to: varunkrr
If you can't figure it out attach what you have so far. (at least then we can see exactly what software you are using)
Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community




Connect with AutoCAD

Twitter

Facebook

Blogs

Pinterest

Youtube