AutoCAD 2010/2011/2012

Reply
Distinguished Contributor
drafter1411
Posts: 389
Registered: ‎10-13-2008
Message 1 of 5 (250 Views)
Accepted Solution

Help 3D modeling

250 Views, 4 Replies
06-14-2012 05:49 AM

Hello everyone, this is something that has been haunting me for 8 years. Look at the model of the plane. How did they do this?

 

I have tried revolve 180 that didn't work. It appears that it is two halfs and the wings and tail fins were added later then join.

*Expert Elite*
Alfred.NESWADBA
Posts: 8,916
Registered: ‎06-29-2007
Message 2 of 5 (248 Views)

Re: Help 3D modeling

06-14-2012 05:59 AM in reply to: drafter1411

Hi,

 

>> How did they do this?

Create sections and connect them with _LOFT (>>>details<<<), explode the object (one of the two halfs) and you see the segementing.

 

But that's just one of many possibilities?

 

- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
*Expert Elite*
Patchy
Posts: 6,226
Registered: ‎09-16-2009
Message 3 of 5 (248 Views)

Re: Help 3D modeling

06-14-2012 06:09 AM in reply to: drafter1411

Here is one way

http://www.youtube.com/watch?v=Dc8AIaKiRgM

 

or you can LOFT many sections of the airplane.

 

Distinguished Contributor
drafter1411
Posts: 389
Registered: ‎10-13-2008
Message 4 of 5 (243 Views)

Re: Help 3D modeling

06-14-2012 06:09 AM in reply to: drafter1411

thanks

*Expert Elite*
JDMather
Posts: 26,356
Registered: ‎04-20-2006
Message 5 of 5 (234 Views)

Re: Help 3D modeling

06-14-2012 06:42 AM in reply to: drafter1411

I only see one Revolve on the part.

Recognizing the various geometries needed to create a 3D model is a critical skill.

Revolve.png

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements

    Come hangout with Autodesk Support Specialist and AutoCAD guru Volker Cocco, to learn about Precision Drafting: Object Snaps and Object Tracking on July 31 @ 11:00 AM PST.

    Click here for registration information!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Connect with AutoCAD

Twitter

Facebook

Blogs

Pinterest

Youtube