I work in a visualization company, and we have several clients who send us DWG files which they have exported from Revit. We have asked them to export to Solids, but in the DWG file in several location the are Body objects. The whole point of doing this is so that we can manipulate the solids (mostly by unions) to eliminate overlaping surfaces. The Body objects we can't do anything with.
Does anyone know if we can convert the body object to a solid? Or is there some way we can eliminate the problem from Revit.
I don't know anything about Revit, but I have Stitched Body objects into solids in Inventor. I assume Inventor fusion will do the same.
I doubt you will get anywhere in AutoCAD.
Can you attach an example Body (preferably in the Inventor forum).
So after seven years, this question still stands?
I'm looking for answers to the same problem using ACAD 2013 and a Revit file from Revit 2011. I have downloaded and installed a Trial version of Revit 2014 but have only managed to export 2 Revit files to plain solid objects but did not figure out how to retain the layering structure so everything is on Layer Zero.
After requesting that the Engineering firm try to export their file as Solids and retain the Layer Properties, some of what appeard to be solids were "Bodies"
Guess I'll keep searching the WEB..
This sounds like a Revit question. I'd hit that group up instead... maybe you already did.
yes, I've been looking at both groups.. It's a problem that occurs when an exported file from Revit is opened in Autocad. Autocad identifies some of the 3D Looking objects as "Body". They are not Solids like the other exported elements but now it becomes an Autocad problem on how to deal with them other than to explode them and then try to work with the Regions that are left.
Exporting them to ACIS from Autocad and then bringing them back almost works but the ones I tried returned as faces.
Exporting from Revit as ACIS Solids does not produce any Body Objects, but then when Importing the ACIS file to Autocad, everything comes in as Layer Zero.
When Exporting from Revit using the Solids Option and then Exporting to DWG / DXF, the layer structure can be retained to some degree but then we get "Body" objects.
This is when Exporting a Revit 2011 file from the Engineer's Revit Model to Autocad 2013 and I have also duplicated the results using the 30 day Trial version of Revit 2014.
I'll keep looking but would still appreciate any tips on where to look or how to resolve... Thanks !
OK, I took the smallest file and using quick select, copied all of the Body Objects to the right. The also exist on the left with in the original location with all of the other exported elements.. (Solids, Blocks etc.)
This file was exported directly from the Engineering firm in their first attempt to export solids that retained layer names for better help in isolating different components.
The goal being to export the entire Mechanical systems for which this is just a very small part of the foundation to then allow each of the MEP team to extract their system from the main model and continue on.
The task is to find if there is a way to convert the "Body" elments to simple solids that can be sliced and unioned again.
Exploding one turns it into a group of Regions. I have tested what it takes to explode and then extrude one side region to obtrain a solid and though it works, it is only reasonable on the flat objects where you are left with one flat region to work with..
See what you can do and thanks for trying.
If I do an Explode on one of the Bodies and then do Sculpt (surfsculpt) I get a 3DSolid.
(make sure your active layer is correct)
Very nice! Not perfect but much better than what I tried before and I see that layers are important. I explored a few different ways to modify larger selections or multiple objects in one command and I see that they become one. And in some cases, that's not a bad thing as the building is more important to us as a 3D background.
And if anyone can come up with any other tricks for dealing with strange objects from Revit Exports or any other program, I'd be happy to hear about it.
I see that they become one. And in some cases, that's not a bad thing as the building is more important to us as a 3D background.
You can run the solidediit>separate to separate the one into many, but you have to do this as many times as there are combined bodies (I don't use AutoCAD much anymore, so I'm not sure if there is a way to do it with one Separate).
It seemed to me like the easiest way was to do each body individually so that they doen't combine.
I haven't tried this, but you might also investigate Autodesk Fusion and see how it handles Bodies.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.