AutoCAD 2010/2011/2012 DWG Format

[#1]

Hi Guy,

this is very weird case

have a specific drawing that the crosshair in the Y direction is broken (sse attached image)

excectly in middle of screen this problem was seen also in older autocad realses (R2008)

the UCS is world and PLAN view is set

the screen is OK the display card + driver is OK

the weird thing is this is only in this dwg and even if it insert it to fresh dwg in comes good

any body seen this?

thanks in advance

Moshe

[#2]

Hi,

never seen, but I also don't work with that large cursor

>> the weird thing is this is only in this dwg

If that is true, upload this drawing, otherwise we can't reproduce it (as it does not appear in any other drawing).

You already have loaded the drawing with _RECOVER or checked it with command _AUDIT?

- alfred -

[#3]

I see it in the X direction as well (left)

SNAPANG ≠ 0.00000000, perhaps?

[#4]

Alfred,

yes the file is AUDIT

Nestly,

i admit at the time i was looking at the file it didn't occur to me about snapang

the file is from a consultant office i support, tomorrow i will take a look again

and if it's not snapang i will post it here

thanks again for your help

moshe

[#5]

If the file converted from Microstation .dgn, some of them do that.

[#6]

Patchy,

wow, you know that for sure? but what is that inside that causes it?

but i do not think that this is the case here, as i said earlier i will check it tomorrow

and let all know

thanks for this input

[#7]

Sure I'm sure, .dgn convert to .dwg and the cursor got rotated in Autocad.

You can Google to see if others see it as I have.

Here is one:

 http://forums.autodesk.com/t5/AutoCAD-2004-2005-Archive/cursor-rotation/td-p/1831013

[#8 · Accepted solution]

Guys

That was it SNAPANG

and it could be came from some conversion from other platform

but the consultant office does not sure about it

Thank you very much all

Moshe