OK ,,,,,,,,,,,,, after much trial and error my partner and I have found the problem. I did not want to have the land automatically attached to the leader so I set the land to "0". This is the culprit. The land CANNOT be set to "0" and mirror the multileader. I set the land to 1/16" (the smallest unit) and everything works fine now.
Someone asked "Why would I want to mirror?". We draw as shown and opposite hand (right and left) pieces all the time. Once an as shown piece is draw it only takes a few minutes to mirror it for the opposite hand. Sometimes the opposite hand piece needs to be modified.
Mirroring also saves time on symmetrical drawings.
wwalker responded: Someone asked "Why would I want to mirror?". We draw as shown and opposite hand (right and left) pieces all the time. Once an as shown piece is draw it only takes a few minutes to mirror it for the opposite hand. Sometimes the opposite hand piece needs to be modified. Mirroring also saves time on symmetrical drawings.
Thanks, I was able to reproduce the problem. One workaround I did notice was that if you grip edit the mirrored mleader's text location, even slightly, the justification of the text will be reset correctly. Thanks again for the drawing.
cmiller66 ,,,,,,,,,,, refer back to my original question. A screen shot of the problem was attached. This should clarify.
You made a comment in this thread that you had reproduced one of the others problem and suggested a "work-around". All to often this is the case when a question is posed instead of actually solving the problem. We don't need more things to remember such as "work-arounds". There is too much to remember now. Production is why we are all using autocad instead of pencil and paper. Autodesk needs to re-think their priorities for this program. We really don't need more "bells and whistles", We need a program that is simple, quick and productive. Go to the other thread which is asking about ribbons and read their comments. Why would anyone think that 3-clicks is more productive than 1-click of the mouse? Now a comment about updating to a new version of autocad. Autodesk should spend more time making this seemless. We all spend way too much time getting custom menus, etc. working again. Instead of being an upgrade it is more like starting with a new program each year. Autodesk needs to get back to the KISS (Keep It Simple Stupid) method. This is not a personal attack. Simplicity,not complexity, should sell.
My response to the question about why I would mirror a multileader ,,,,,,,,,,,,,,,,, why not mirror a multileader? Why would I mirror an object and copy the multileaders and then drag them where I want them. Just draw them one time and mirror everything. It's all about speed, efficiency and production. Let's not forget ,,,,,,,,,,,, Time is money!
Yeah I realized that moving the text will fix it. However it is just really annoying to have to do if ;i have more than one or 2 to fix...especially isnce it should work right with first time. I'm just a lazy bum... haha
Thanks for your input. I did see your original posting, but have yet to reproduce it from scratch with an mleader containing a landing (as shown in the doc attached to the OP). I was able to reproduce the other user's problem using his dwg (no landing) though. Can you attach the dwg you used for that initial screen capture? Is this a brand new drawing created from scratch in 2010? Is the dwt being used to create it from the default 2010 install or from an earlier release? Many of these problems can result from just a certain combination of settings, font, sysvars, etc.
I actually just tried to start from a blank dwt for 2010 and even just using the "Standard" leader style it still gives me the same issue. If I uncheck all the landing settings, it starts the problems with rotation and mirroring.