Can anyone provide a simple list of the proper scale settings to be set in the host and the incoming drawing when the host drawing is drawn by an architect using 1= 1 inch, and the incoming Xref is drawn by a civil engineer using 1= 1 foot? In each drawing, what are the proper values for:
I realize that there are numerous threads covering these settings, but I cannot find a thread that simplifies the issue and deals specifically with civil-to-architectural scale settings.
Also, the -DWGUNITS command asks some questions beyond what Drawing Units are desired:
Scale objects from other drawings upon insert? [Yes/No]
Match INSUNITS to drawing units? [Yes/No]
Scale objects in current drawing to reflect change in units? [Yes/No]
What are the correct answers to these questions when Xref-ing a civil engineer's dwg into an architectural dwg?
Sure, but when drawings go back and forth between architects and civil engineers, each discipline gets annoyed at finding that things have been scaled to the other's way of working. Our civil engineers find it unprofessional and irritating.
The way I've worked around this is to reference in the architects drawing in my site base drawing. I then scale rotate and place the arch drawing in the correct spot on my civil drawing. Then when we get an updated arch drawing, we can just save over the existing arch drawing and since we are using our civil site base, we don't need to re-insert or re-scale anything.
This is what I've don't, at least until architects start using engineering units and putting things in the real location in the world