Perhaps the reason I never encountered the problem before was as the other thread mentioned, I always change the new layers properties before deciding what to name the layer. As soon as i did it the other way around i saw the problem. This should be a fairly easy fix for the programmers.
I agree with the use of a profile switch with a known working profile in your software target. The key component is “known working” profile that is not corrupt. If you create a new User Account and then log in to run the software this should/will generate a stock configuration and clean profile with this new account and session. Once you have a verified clean profile to start with you can then adjust as needed and give it a new name to export out the AWS file and save this in case your profile becomes corrupt again. This would be created for a backup and reference so you will keep in a location outside of the current version of this file loaded up in your AutoCAD software.
I have had the same issue with colors and layers; for me it is intermittent problem. In addition to that when I use the layer command I get a big black blob where my layernames and properties should be a AutoCAD 2012 development. I attached a printscrn of the issue.It is more prevalent since I started using a Windows 7 64 bit operating sytem
As a CAD manager it is affecting my productivity and driving me a little crazy.
Autodesk please help this damsel in distress :-(
This problem is being looked at. I am following this problem very closely. I try to find these threads and reply so you at least can kind of understand the problem.
The problem is really (and the reason so few of you are reporting it) that you are just too fast and the layer dialog is not stopping you from being faster than it.
In the mean time, here are some things to try:
-When you are in the layer dialog, you create a new layer and it gives you the edit name field. Enter the name and I would guess you click directly from naming to color. Don't. Click from naming to just a blank part of the layer dialog. Then click to color. This has resolved most of our users problems.
-Wait a second between choosing a color and closing the layer manager. The updating takes half a second. Even if you do not follow my advice above and the layer manager has to both update the name and color at the same time. The faster computers never see this problem, but even on a terribly slow computer this updating takes a second or two.
-Push the apply button.
So glad to see your post. This is exactly what I suspected as the problem and exactly what I told one of our drafters to do. I have had this problem in past versions of AutoCAD and now she is experiencing the problem in AutoCAD 2012. We rarely run into this because we use standard layers. So when we have to create a new layer, it's not often. I told her that I felt as if I was doing things too fast and if I slowed down it kept the settings. So this is what we are doing for now. If there is a fix or update to resolve this problem, please post on here so that we are made aware of it.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.