AutoCAD 2010/2011/2012 DWG Format

[#1]

Hello, i have laptop LG P1 with vista 32bit . I installed autocad 2011 trial with no errors or something.

But when i try to open it,it trys to open for a few seconds and then it crashes with no errors.

[#2]

Installation Help
http://www.autodesk.com/install
Up & Ready
http://usa.autodesk.com/adsk/servlet/index?siteID=123112&id=9415420&linkID=9240617

[#3]

i installed autocad correctly with no errors . The problem is when i try to run autocad

[#4]

that's what Up and Ready link was for...

[#5]

i dint find anything helpful there

[#6]

Hello Michalis11,

Here is a wild guess the system may be trying to open in hardware acceleration and your system may not support it.

1.     Try right clicking on the short cut and choosing properties

2.       Under target at the end of the short cut link type what is in quotes “ /nohardware”

Then ok out and try to launch.

Hope this helps,

[#7]

thanks for the reply, i cant check it right now but im sure thats not the problem.

because i found this error in:

ACD2011ELLAdlm

4404    2010/06/27    11:23:56    Reason=Fatal error
4404    2010/06/27    11:23:56    ComputerName=LGP1
4404    2010/06/27    11:23:56    OS=6.0.6002.Service Pack 2
4404    2010/06/27    11:23:56    File=AdlmFlxActTS.cpp,Line=609
4404    2010/06/27    11:23:56    AdlmActError=8 [An item is not found]
4404    2010/06/27    11:23:56    Reason=Fatal error
4404    2010/06/27    11:23:56    ComputerName=LGP1
4404    2010/06/27    11:23:56    OS=6.0.6002.Service Pack 2
4404    2010/06/27    11:23:56    File=AdlmFlxActAppTrialAndConfigLicenseHandler.cpp,Line=361
4404    2010/06/27    11:23:56    AdlmActError=18 [Argument to a function is bad]
3376    2010/06/27    11:23:56    Reason=Fatal error
3376    2010/06/27    11:23:56    ComputerName=LGP1
3376    2010/06/27    11:23:56    OS=6.0.6002.Service Pack 2
3376    2010/06/27    11:23:56    File=AdlmIntSATSLicense.cpp,Line=364
3376    2010/06/27    11:23:56    VendorID=2 [ADLMACT]
3376    2010/06/27    11:23:56    VendorError=18 [Argument to a function is bad]
4164    2010/06/27    11:24:23    Reason=Fatal error
4164    2010/06/27    11:24:23    ComputerName=LGP1
4164    2010/06/27    11:24:23    OS=6.0.6002.Service Pack 2
4164    2010/06/27    11:24:23    File=AdlmFlxActTS.cpp,Line=609
4164    2010/06/27    11:24:23    AdlmActError=8 [An item is not found]
4164    2010/06/27    11:24:23    Reason=Fatal error
4164    2010/06/27    11:24:23    ComputerName=LGP1
4164    2010/06/27    11:24:23    OS=6.0.6002.Service Pack 2
4164    2010/06/27    11:24:23    File=AdlmFlxActAppTrialAndConfigLicenseHandler.cpp,Line=361
4164    2010/06/27    11:24:23    AdlmActError=18 [Argument to a function is bad]
1488    2010/06/27    11:24:23    Reason=Fatal error
1488    2010/06/27    11:24:23    ComputerName=LGP1
1488    2010/06/27    11:24:23    OS=6.0.6002.Service Pack 2
1488    2010/06/27    11:24:23    File=AdlmIntSATSLicense.cpp,Line=364
1488    2010/06/27    11:24:23    VendorID=2 [ADLMACT]
1488    2010/06/27    11:24:23    VendorError=18 [Argument to a function is bad]
5796    2010/06/27    11:34:55    Reason=Fatal error
5796    2010/06/27    11:34:55    ComputerName=LGP1
5796    2010/06/27    11:34:55    OS=6.0.6002.Service Pack 2
5796    2010/06/27    11:34:55    File=AdlmFlxActTS.cpp,Line=609
5796    2010/06/27    11:34:55    AdlmActError=8 [An item is not found]
5796    2010/06/27    11:34:55    Reason=Fatal error
5796    2010/06/27    11:34:55    ComputerName=LGP1
5796    2010/06/27    11:34:55    OS=6.0.6002.Service Pack 2
5796    2010/06/27    11:34:55    File=AdlmFlxActAppTrialAndConfigLicenseHandler.cpp,Line=361
5796    2010/06/27    11:34:55    AdlmActError=18 [Argument to a function is bad]
2768    2010/06/27    11:34:56    Reason=Fatal error
2768    2010/06/27    11:34:56    ComputerName=LGP1
2768    2010/06/27    11:34:56    OS=6.0.6002.Service Pack 2
2768    2010/06/27    11:34:56    File=AdlmIntSATSLicense.cpp,Line=364
2768    2010/06/27    11:34:56    VendorID=2 [ADLMACT]
2768    2010/06/27    11:34:56    VendorError=18 [Argument to a function is bad]

i found a solution i think here: http://forums.autodesk.com/t5/Autodesk-Inventor/Inventor-2010-flexnet-license-error/td-p/2507570/pag...

its for inventor 2010 but i think the problem i have is the same .

but i cant find the legacy_autodesk_licensing_service in "HKEY_LOCAL_MACHI

 NE\SYSTEM\CurrentControlSet\Enum\Root\" to change permission and i dont have the bat file he got

[#8]

 NE\SYSTEM\CurrentControlSet\Enum\Root\" to change permission and i dont have the bat file he got

[#9]

Hello,

  I was wondering if you had found a solution to your problem? I just installed AutoCAD 2011 and my install does the same thing.

Thanks,

Layton

[#10]

Michalis11,

Can you post your view tune log?

To do this:

1) 3dconfig

2) view tune log

3) save as and post it.

Thanks,

[#11]

1º run services.msc

2º look for flexnetlicensingservice, must be on "automatic" mode

it worked for me. some kind of antispyware soft  was the cause.