AutoCAD 2007/2008/2009

Reply
Member
MikeB_SKG
Posts: 4
Registered: ‎05-07-2012
Message 111 of 118 (5,860 Views)

Re: One or more objects in this drawing cannot be saved to the specified format

05-10-2012 10:05 AM in reply to: nrz13
Thank you for your response. Please note that the problem has been solved and was related to the SBS 2011 software (Indexing). The Indexing has been turned off and all issues resolved. Greatly appreciated. Thank You, [3New Logo] Michael Brungard SKG Enterprises, Inc. 9260 East Raintree Drive Suite 140 Scottsdale, Arizona 85260 Ph) 480.998.5600 Email) mikeb@skgaz.com www.skgaz.comThis SKG Enterprises, Inc. e-mail message and any attachment(s), are intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any use, dissemination, distribution or copying of this e-mail message, and/or any attachment hereto, is strictly prohibited. If you have received, this e-mail in error, please immediately notify the sender and permanently delete the original and any copy of this message. Thank you. P Please consider the environment before printing this e-mail
New Member
alfredgmar
Posts: 1
Registered: ‎08-24-2012
Message 112 of 118 (5,666 Views)

Re: One or more objects in this drawing cannot be saved to the specified format

08-24-2012 08:22 AM in reply to: AllenJessup

la respuesta correcta a esta pregunta es AECTOACAD Y SE GUARDA UNA COPIA DEL TIPO WBLOCK

la cual se puede modificar se exporta y queda lista para seguir trabajando y modificando

saludos:smileywink:

Active Member
sharpl
Posts: 9
Registered: ‎10-10-2012
Message 113 of 118 (5,550 Views)

Re: One or more objects in this drawing cannot be saved to the specified fo

12-17-2012 11:03 AM in reply to: Darin.Green

Didn't do any good, seriously? Such a waste of time ...

 

Active Member
sharpl
Posts: 9
Registered: ‎10-10-2012
Message 114 of 118 (5,550 Views)

Re: One or more objects in this drawing cannot be saved to the specified format

12-17-2012 11:06 AM in reply to: JeffPaulsen

No it doesn't even after 3 times running Audit. Is it Windows 7 bug?

 

New Member
mustafa_kot
Posts: 1
Registered: ‎04-04-2013
Message 115 of 118 (5,406 Views)

Re: One or more objects in this drawing cannot be saved to the specified format

04-04-2013 01:06 AM in reply to: nrz13

Open the '' Purge '' setup from Drawing Utilities in Menu bar, then click to '' Purge nested items '' for make it.
And finally, you'll continue in your drawing smoothly...

Member
MikeB_SKG
Posts: 4
Registered: ‎05-07-2012
Message 116 of 118 (5,402 Views)

Re: One or more objects in this drawing cannot be saved to the specified format

04-04-2013 07:30 AM in reply to: mustafa_kot
Thank you for your response. Purge was the very first thing done. We have
also gone through and wblocked out the drawing and started a new drawing,
dxf out and restart an new drawing. None have worked.

We recently have purchased acad 2013. While there is a learning curve to
this new software, at least from 2009 we hope this resolves the problems.

--
Thank You,
*SKG Enterprises, Inc*.

Michael Brungard


*This SKG Enterprises, Inc. e-mail message and any attachment(s), are
intended only for use by the addressee(s) named herein and may contain
legally privileged and/or confidential information. If you are not the
intended recipient(s), or the employee or agent responsible for delivery of
this message to the intended recipient(s), you are hereby notified that any
use, dissemination, distribution or copying of this e-mail message, and/or
any attachment hereto, is strictly prohibited. If you have received, this
e-mail in error, please immediately notify the sender and permanently
delete the original and any copy of this message. Thank you.*



*P** **Please consider the environment before printing this e-mail*
New Member
mwambsjoe
Posts: 1
Registered: ‎03-28-2014
Message 117 of 118 (333 Views)

Re: One or more objects in this drawing cannot be saved to the specified format

03-28-2014 05:10 AM in reply to: AllenJessup

Good afternoon, am seeking help for the above mentioned subject

 

Mentor
kmiller
Posts: 257
Registered: ‎12-17-2007
Message 118 of 118 (326 Views)

Re: One or more objects in this drawing cannot be saved to the specified format

03-28-2014 06:02 AM in reply to: MikeB_SKG

Have you tried the previous posted suggestions about using wblock and purging the file?  Is it all files, just one file, etc....  What release are you using?  Can you give more information or possibly send a sample file that the issue is happening on?  At this point we use 2013 version software, we have 2014 if needed but have not seen the issue in years. 

-------------------------------------------------------------------------------------------------

If this response answers your question please click "Accept as Solution".

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community




Connect with AutoCAD

Twitter

Facebook

Blogs

Pinterest

Youtube