AutoCAD 2007/2008/2009

Reply
*Dilip Damle
Message 1 of 22 (358 Views)

Not Trusted dwg warning even after saving

358 Views, 21 Replies
08-24-2007 10:07 PM
Hello everyone,

When you open a drawing savad by some other application
you get the warning "This drawing was saved by an application
not developed or licensed by Autodesk................."

But after I save/saveas and close the Drawing from A2k8
This message should not be shown the next time.

But I can not get rid of this message. Is it normal?

--
rgds
Dilip Damle
--------------------------------------------------------------------
Life will be much easier if we just have a printout of
all the commands that exist in Autocad kept handy.
*Matt Kolberg
Message 2 of 22 (358 Views)

Re: Not Trusted dwg warning even after saving

08-25-2007 11:13 AM in reply to: *Dilip Damle
Look at tthe DWGCHECK variable to modify the warnings you get.

Check out this link:
http://usa.autodesk.com/adsk/servlet/item?siteID=123112&id=9078652

Matt
*Tony Tanzillo
Message 3 of 22 (358 Views)

Re: Not Trusted dwg warning even after saving

08-25-2007 02:05 PM in reply to: *Dilip Damle
Can you post a copy of the file that causes
AutoCAD to continue to display the FUD
message, even after saving it in 2008?

While I can't confirm it, I suppose it's
possible that Autodesk did something like
the educational 'virus', with files that were
at some point in their life, written by non-
Autodesk products.


--
http://www.caddzone.com

AcadXTabs: MDI Document Tabs for AutoCAD 2008
Supporting AutoCAD 2000 through 2008
http://www.acadxtabs.com

"Dilip Damle" wrote in message news:5700772@discussion.autodesk.com...
Hello everyone,

When you open a drawing savad by some other application
you get the warning "This drawing was saved by an application
not developed or licensed by Autodesk................."

But after I save/saveas and close the Drawing from A2k8
This message should not be shown the next time.

But I can not get rid of this message. Is it normal?

--
rgds
Dilip Damle
--------------------------------------------------------------------
Life will be much easier if we just have a printout of
all the commands that exist in Autocad kept handy.
Active Member
DILIPDAMLE5192
Posts: 7
Registered: ‎03-09-2007
Message 4 of 22 (358 Views)

Re: Not Trusted dwg warning even after saving

08-26-2007 07:04 AM in reply to: *Dilip Damle
Hello,

Here is the file
Distinguished Contributor
jmcintyre
Posts: 1,654
Registered: ‎07-20-2003
Message 5 of 22 (358 Views)

Re: Not Trusted dwg warning even after saving

08-26-2007 02:15 PM in reply to: *Dilip Damle
Try running a recovery on the file.
*Tony Tanzillo
Message 6 of 22 (358 Views)

Re: Not Trusted dwg warning even after saving

08-26-2007 04:14 PM in reply to: *Dilip Damle
wrote:

>> Try running a recovery on the file.

Did you try that, per chance?

--
http://www.caddzone.com

AcadXTabs: MDI Document Tabs for AutoCAD 2008
Supporting AutoCAD 2000 through 2008
http://www.acadxtabs.com
*Doug Broad
Message 7 of 22 (358 Views)

Re: Not Trusted dwg warning even after saving

08-26-2007 05:32 PM in reply to: *Dilip Damle
That is strange. Auditing and recovering do not discover any errors. Purging and saving
does nothing.

The following choices will make the drawing appear safe but I am uncertain whether you
will lose anything valuable that is hidden.
1) Dxfout. Start a new drawing and dxfin.
2) Start a new drawing. Insert the problem drawing (exploded).

Strange that the application creating it made all the circles into splines. Nice looking
drawing though.



wrote in message news:5701247@discussion.autodesk.com...
Hello,

Here is the file
*Gehenna
Message 8 of 22 (358 Views)

Re: Not Trusted dwg warning even after saving

08-26-2007 06:27 PM in reply to: *Dilip Damle
Dilip Damle wrote:
> Hello everyone,
>
> When you open a drawing savad by some other application
> you get the warning "This drawing was saved by an application
> not developed or licensed by Autodesk................."
>
> But after I save/saveas and close the Drawing from A2k8
> This message should not be shown the next time.
>
> But I can not get rid of this message. Is it normal?
>
>
I Superpurged the dwg and copied and pasted and now do NOT get the
warning. changed the name slightly. See the attached.
*Tony Tanzillo
Message 9 of 22 (358 Views)

Re: Not Trusted dwg warning even after saving

08-27-2007 05:37 AM in reply to: *Dilip Damle

Well, it certainly does seem to be
'virus-like' behavior, because

purging; recovering (which finds no
errors), and saving in AutoCAD

2008, does not change anything, and
as per the screenshot
below,

the ObjectARX API is reporting that
the file was not saved
by

Autodesk software.

 

 

[img src="@164698"]

 

Hello,

Here is the
file
*Jim
Message 10 of 22 (358 Views)

Re: Not Trusted dwg warning even after saving

08-27-2007 06:51 AM in reply to: *Dilip Damle
Autodesk does have a utility to convert files saved by other programs. DWG
TrueConvert 2007. It seems to work - so far - for older drawings that I
have saved using other programs.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community




Connect with AutoCAD

Twitter

Facebook

Blogs

Pinterest

Youtube