AutoCAD 2007/2008/2009

## AutoCAD 2007/2008/2009

New Member
Posts: 2
Registered: ‎08-14-2012
Message 1 of 4 (814 Views)

# Intersection line between 2 planes

814 Views, 3 Replies
08-14-2012 01:50 AM

Hi,

I need to find the intersection line between 2 planes in 3D,

the planes themselves are not co-planar in anyway, at best they are perpendicular to each other

I know this is a simple mathematical or discribtive geometry problem, but I havn't found the right tools to do so

under AutoCad 2007

The attached image is of a simple sketch of the problem, but if it can be solved then the original problem would be solved

thanks,

Eugene

*Expert Elite*
Posts: 8,890
Registered: ‎06-29-2007
Message 2 of 4 (806 Views)

# Re: Intersection line between 2 planes

08-14-2012 03:33 AM in reply to: noogie69

Hi,

make extruded solids of each of these two rectangles, then use boolean function "intersect". That gives you the ability to use osnap then for one of the resulting 4 edges (well, you just have to take care which of the edges is the right one).

- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
New Member
Posts: 2
Registered: ‎08-14-2012
Message 3 of 4 (805 Views)

# Re: Intersection line between 2 planes

08-14-2012 03:37 AM in reply to: Alfred.NESWADBA

I'm aware of that solution, but I have to do this about 50 times,

and the distances are tiny so all maniulations are tricky at best

I'm looking for an automated process or a function so that the results won't be as sensitive to the manual procedure envolving extruding and intersecting solids

*Expert Elite*
Posts: 26,287
Registered: ‎04-20-2006
Message 4 of 4 (784 Views)

# Re: Intersection line between 2 planes

08-14-2012 12:36 PM in reply to: noogie69

noogie69 wrote:

I'm looking for an automated process or a function so that the results won't be as sensitive to the manual procedure envolving extruding and intersecting solids

Autodesk Inventor has a tool to do this and is fully parametric.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm

### You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

### Need installation help?

Start with some of our most frequented solutions to get help installing your software.

### Maintenance Subscription Resources

Upgrading to a 2015 product? Make sure to check these out 1st!

Twitter

Facebook

Blogs

Pinterest

Youtube