AutoCAD 2007/2008/2009

Reply
Valued Contributor
Ertqwa
Posts: 88
Registered: ‎10-03-2011
Message 1 of 9 (803 Views)
Accepted Solution

Dimension style - text position

803 Views, 8 Replies
07-30-2012 10:56 AM

Hello Forum,

 

I create a dimension style as follows:

The dimension style is architectural, above line, alligned with line.

It also has alternate units; decimal, below primary value.

 

Now if I place a horizontal dimension, all is fine. But as soon as I move the dimension text with its grip, the text drops down a bit, intersecting with the line. Also, after the move the property "Text Offset" is not used anymore.

 

How do I fix this? How can I move the dimension text without problems?

 

Thank you.

Mentor
khoa.ho
Posts: 152
Registered: ‎09-15-2011
Message 2 of 9 (780 Views)

Re: Dimension style - text position

08-03-2012 11:43 AM in reply to: Ertqwa

This problem happens firstly with "Bellow primary value", then plus with the dimension text has fraction in Architectural unit format. AutoCAD does not locate the text correctly with those dimension settings. When we move the text, it will drop down a bit. To fix that, right click on the dimension, choose 'Dim Text position" menu, select "Move text with leader", and then try to move the text not to intersect with the line. The final text will look shorter but at least it helps to trick this AutoCAD issue.

-Khoa

Valued Contributor
Ertqwa
Posts: 88
Registered: ‎10-03-2011
Message 3 of 9 (752 Views)

Re: Dimension style - text position

08-18-2012 11:43 PM in reply to: khoa.ho

Thank you for the reply.

 

Unfortunately this does not solve the issue.

*Expert Elite*
scot-65
Posts: 2,127
Registered: ‎12-11-2003
Message 4 of 9 (740 Views)

Re: Dimension style - text position

08-22-2012 03:29 PM in reply to: Ertqwa

Look into DIMFRAC = 2

 

???

Scot-65
Dyslexia is a permanent physical disability that cannot be seen.
Valued Contributor
Ertqwa
Posts: 88
Registered: ‎10-03-2011
Message 5 of 9 (700 Views)

Re: Dimension style - text position

09-21-2012 11:46 AM in reply to: scot-65

Thank you for the reply.

 

Unfortunately DIMFRAC = 2 does not solve the issue.

Distinguished Mentor
steve216586
Posts: 845
Registered: ‎07-10-2007
Message 6 of 9 (654 Views)

Re: Dimension style - text position

10-22-2012 11:35 AM in reply to: Ertqwa

This may sound a little bit cumbersome but try placing a return (keyboard - ENTER) after the first dimension.  Basically, you will be leaving a blank line of text between the primary and secondary dimensions.  Hope that helps.

Valued Contributor
Ertqwa
Posts: 88
Registered: ‎10-03-2011
Message 7 of 9 (632 Views)

Re: Dimension style - text position

10-28-2012 12:55 AM in reply to: steve216586

Hi, ty for you response.

 

I'm not sure what you mean. I only have one textoverride in properties and that overrides both. So <> keeps them together.

Distinguished Mentor
steve216586
Posts: 845
Registered: ‎07-10-2007
Message 8 of 9 (618 Views)

Re: Dimension style - text position

10-31-2012 07:04 AM in reply to: Ertqwa

"It also has alternate units; decimal, below primary value."  From your original post, hmm??

 

After you move the text and it, " drops down a bit", select the text for editing by double clicking on it.  After the Primary unit measurement hit keyboard "enter".  This will leave a text line space between the primary and alternate units.

What you have now:

<> (Primary)

<> (Secondary

What you will have after doing the above:

<>"ENTER" (Primary)

(blank line space)

<> (Secondary)

 

I hope this clears things up.

 

 

Valued Contributor
Ertqwa
Posts: 88
Registered: ‎10-03-2011
Message 9 of 9 (593 Views)

Re: Dimension style - text position

11-08-2012 11:29 AM in reply to: steve216586

Hi,

 

Your suggestion didn't work at first because I typed <>\P<> but you have to type <>\P[].

 

Thank you.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community




Connect with AutoCAD

Twitter

Facebook

Blogs

Pinterest

Youtube