AutoCAD 2007/2008/2009

Reply
*Tony Tanzillo
Message 21 of 24 (48 Views)

Re: Broken

04-10-2008 12:31 PM in reply to: *Tony Tanzillo
Ok thanks.

It looks like Sub-selection of 3DSOLIDs is the trigger.

--
http://www.caddzone.com

AcadXTabs: MDI Document Tabs for AutoCAD 2009
Supporting AutoCAD 2000 through 2009
http://www.acadxtabs.com

"Jason Piercey" wrote in message news:5901087@discussion.autodesk.com...
I do happen to be working on a job that contains
3dsolids, so that is a good possibility but I can't
be 100% sure.




"Tony Tanzillo" wrote in message
news:5901018@discussion.autodesk.com...
You said you can replicate this, and others can't.

Can I ask, if in the same AutoCAD session where you saw it, if you were
working with 3DSOLIDs ?

--
http://www.caddzone.com

AcadXTabs: MDI Document Tabs for AutoCAD 2009
Supporting AutoCAD 2000 through 2009
http://www.acadxtabs.com
*Jason Piercey
Message 22 of 24 (48 Views)

Re: Broken

04-10-2008 01:12 PM in reply to: *Tony Tanzillo
For that drawing only or for the session?

Do you have steps to reproduce it?


"Tony Tanzillo" wrote in message
news:5901090@discussion.autodesk.com...

> It looks like Sub-selection of 3DSOLIDs is the trigger.
*Tony Tanzillo
Message 23 of 24 (48 Views)

Re: Broken

04-10-2008 01:49 PM in reply to: *Tony Tanzillo
I reproduced it by just opening a file with a composite 3D solid, and doing some subselections of solids (including Fillets, which cause AutoCAD to go bonkers).

After that, it happens in any file opened in that session.

--
http://www.caddzone.com

AcadXTabs: MDI Document Tabs for AutoCAD 2009
Supporting AutoCAD 2000 through 2009
http://www.acadxtabs.com

"Jason Piercey" wrote in message news:5901106@discussion.autodesk.com...
For that drawing only or for the session?

Do you have steps to reproduce it?


"Tony Tanzillo" wrote in message
news:5901090@discussion.autodesk.com...

> It looks like Sub-selection of 3DSOLIDs is the trigger.
Mentor
Steve_Johnson
Posts: 604
Registered: ‎05-01-2005
Message 24 of 24 (48 Views)

Re: Broken

04-10-2008 06:23 PM in reply to: *Tony Tanzillo
> I've since learned that it doesn't happen right after a cold start.

Hmm, that makes it particularly nasty. People will test their stuff, it will work fine, they will distribute it, then it will start failing randomly and inconsistently in use. Ugh.

Steve Johnson
http://www.blog.cadnauseam.com/
Steve Johnson - blog nauseam - ClassicArray
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.