AutoCAD 2004/2005/2006 DWG Format
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic to the Top
- Bookmark
- Subscribe
- Printer Friendly Page
*Bruce Sheldon
Sheet Set Associatio
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
593 Views, 7 Replies
03-13-2006 10:25 AM
Hi all,
Is there any way to "open" a drawing, "remove association from Sheet Set",
save, close.
Simple.
Am tired of not being able to add drawings to a new Sheet Set. A PITA.
Bruce
Is there any way to "open" a drawing, "remove association from Sheet Set",
save, close.
Simple.
Am tired of not being able to add drawings to a new Sheet Set. A PITA.
Bruce
*Jimmy Bergmark
Re: Sheet Set Associatio
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-13-2006 10:38 AM in reply to:
*Bruce Sheldon
http://jtbworld.blogspot.com/2005/10/remove-sheet-
--
Best Regards, Jimmy Bergmark
CAD and Database Developer Manager at www.pharmadule-emtunga.com
Blog: http://jtbworld.blogspot.com
JTB FlexReport (FLEXnet / FLEXlm report tool) -
http://www.jtbworld.com/jtbflexreport
SmartPurger (Purges automatically) - http://www.jtbworld.com/smartpurger.htm
or download some freeware at http://www.jtbworld.com
More on AutoCAD 2006 and 2007
http://www.jtbworld.com/autocad2006.htm
http://www.jtbworld.com/autocad2007.htm
"Bruce Sheldon" wrote in message
news:5109412@discussion.autodesk.com...
Hi all,
Is there any way to "open" a drawing, "remove association from Sheet Set",
save, close.
Simple.
Am tired of not being able to add drawings to a new Sheet Set. A PITA.
Bruce
--
Best Regards, Jimmy Bergmark
CAD and Database Developer Manager at www.pharmadule-emtunga.com
Blog: http://jtbworld.blogspot.com
JTB FlexReport (FLEXnet / FLEXlm report tool) -
http://www.jtbworld.com/jtbflexreport
SmartPurger (Purges automatically) - http://www.jtbworld.com/smartpurger.htm
or download some freeware at http://www.jtbworld.com
More on AutoCAD 2006 and 2007
http://www.jtbworld.com/autocad2006.htm
http://www.jtbworld.com/autocad2007.htm
"Bruce Sheldon"
news:5109412@discussion.autodesk.com...
Hi all,
Is there any way to "open" a drawing, "remove association from Sheet Set",
save, close.
Simple.
Am tired of not being able to add drawings to a new Sheet Set. A PITA.
Bruce
*Tim Decker
Re: Sheet Set Associatio
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-13-2006 10:40 AM in reply to:
*Bruce Sheldon
Normally if you try to import a drawing into a new sheet set, it will
give you the option of removing the drawing from a previous sheet set,
if it was part of a prior set.
You can also just right click on a drawings existing sheet set entry,
and it gives you an option to remove it from it's current set.
SSLOCATE set to 1 will automatically open an associated sheet set if a
drawing has one, to make it easy to "remove" it, if you don't know
which sheet set it might be part of.
--
Bruce Sheldon wrote:
> Hi all,
>
> Is there any way to "open" a drawing, "remove association from Sheet
> Set", save, close.
> Simple.
>
> Am tired of not being able to add drawings to a new Sheet Set. A
> PITA.
>
> Bruce
give you the option of removing the drawing from a previous sheet set,
if it was part of a prior set.
You can also just right click on a drawings existing sheet set entry,
and it gives you an option to remove it from it's current set.
SSLOCATE set to 1 will automatically open an associated sheet set if a
drawing has one, to make it easy to "remove" it, if you don't know
which sheet set it might be part of.
--
Bruce Sheldon wrote:
> Hi all,
>
> Is there any way to "open" a drawing, "remove association from Sheet
> Set", save, close.
> Simple.
>
> Am tired of not being able to add drawings to a new Sheet Set. A
> PITA.
>
> Bruce
*Bruce Sheldon
Re: Sheet Set Associatio
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-13-2006 11:15 AM in reply to:
*Bruce Sheldon
Tim,
Thanks for the reply.
Doesn't really answer my question, though.
Let me explain.
* I want to remove a drawing from any association to a Sheet Set.
* I don't want to even so much as see the Sheet Set (assume it's on the
other side of the world).
* I don't want to see the "script blocker" dialog box that asks if you want
to remove, etc...
* I want to script a whole bunch of DWGs, delete any and all Sheet Set
associations from them.
"Tim Decker" wrote in
message news:5109444@discussion.autodesk.com...
Normally if you try to import a drawing into a new sheet set, it will
give you the option of removing the drawing from a previous sheet set,
if it was part of a prior set.
You can also just right click on a drawings existing sheet set entry,
and it gives you an option to remove it from it's current set.
SSLOCATE set to 1 will automatically open an associated sheet set if a
drawing has one, to make it easy to "remove" it, if you don't know
which sheet set it might be part of.
--
Bruce Sheldon wrote:
> Hi all,
>
> Is there any way to "open" a drawing, "remove association from Sheet
> Set", save, close.
> Simple.
>
> Am tired of not being able to add drawings to a new Sheet Set. A
> PITA.
>
> Bruce
Thanks for the reply.
Doesn't really answer my question, though.
Let me explain.
* I want to remove a drawing from any association to a Sheet Set.
* I don't want to even so much as see the Sheet Set (assume it's on the
other side of the world).
* I don't want to see the "script blocker" dialog box that asks if you want
to remove, etc...
* I want to script a whole bunch of DWGs, delete any and all Sheet Set
associations from them.
"Tim Decker"
message news:5109444@discussion.autodesk.com...
Normally if you try to import a drawing into a new sheet set, it will
give you the option of removing the drawing from a previous sheet set,
if it was part of a prior set.
You can also just right click on a drawings existing sheet set entry,
and it gives you an option to remove it from it's current set.
SSLOCATE set to 1 will automatically open an associated sheet set if a
drawing has one, to make it easy to "remove" it, if you don't know
which sheet set it might be part of.
--
Bruce Sheldon wrote:
> Hi all,
>
> Is there any way to "open" a drawing, "remove association from Sheet
> Set", save, close.
> Simple.
>
> Am tired of not being able to add drawings to a new Sheet Set. A
> PITA.
>
> Bruce
*Tim Decker
Re: Sheet Set Associatio
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-13-2006 11:25 AM in reply to:
*Bruce Sheldon
From Jimmy's post above, the blog he points to says that the following
code, that can be run in a script file (so it can be done to multiple
drawings) can do the trick. I have not tested this though.
fileopen "x:\drawings\drawing1.dwg"
(dictremove (namedobjdict) "AcSheetSetData")
qsave
fileopen "x:\drawings\drawing2...
and so on.
--
Bruce Sheldon wrote:
> Tim,
>
> Thanks for the reply.
> Doesn't really answer my question, though.
> Let me explain.
>
> * I want to remove a drawing from any association to a Sheet Set.
> * I don't want to even so much as see the Sheet Set (assume it's on
> the other side of the world).
> * I don't want to see the "script blocker" dialog box that asks if
> you want to remove, etc...
> * I want to script a whole bunch of DWGs, delete any and all Sheet
> Set associations from them.
>
> "Tim Decker" wrote in
> message news:5109444@discussion.autodesk.com...
> Normally if you try to import a drawing into a new sheet set, it will
> give you the option of removing the drawing from a previous sheet set,
> if it was part of a prior set.
>
> You can also just right click on a drawings existing sheet set entry,
> and it gives you an option to remove it from it's current set.
>
> SSLOCATE set to 1 will automatically open an associated sheet set if a
> drawing has one, to make it easy to "remove" it, if you don't know
> which sheet set it might be part of.
code, that can be run in a script file (so it can be done to multiple
drawings) can do the trick. I have not tested this though.
fileopen "x:\drawings\drawing1.dwg"
(dictremove (namedobjdict) "AcSheetSetData")
qsave
fileopen "x:\drawings\drawing2...
and so on.
--
Bruce Sheldon wrote:
> Tim,
>
> Thanks for the reply.
> Doesn't really answer my question, though.
> Let me explain.
>
> * I want to remove a drawing from any association to a Sheet Set.
> * I don't want to even so much as see the Sheet Set (assume it's on
> the other side of the world).
> * I don't want to see the "script blocker" dialog box that asks if
> you want to remove, etc...
> * I want to script a whole bunch of DWGs, delete any and all Sheet
> Set associations from them.
>
> "Tim Decker"
> message news:5109444@discussion.autodesk.com...
> Normally if you try to import a drawing into a new sheet set, it will
> give you the option of removing the drawing from a previous sheet set,
> if it was part of a prior set.
>
> You can also just right click on a drawings existing sheet set entry,
> and it gives you an option to remove it from it's current set.
>
> SSLOCATE set to 1 will automatically open an associated sheet set if a
> drawing has one, to make it easy to "remove" it, if you don't know
> which sheet set it might be part of.
*Bruce Sheldon
Re: Sheet Set Associatio
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-13-2006 12:26 PM in reply to:
*Bruce Sheldon
Tim,
The LISP command looks like it does the job.
Anyone know how to stop the dialog box from coming up?
I'm talking about version 2005 since 2006 automatically removes
associations.
I'm running 2005 on one machine and 2006 on another. I can do the script on
my 2006 machine, but would be nice to know how to stop the dialog on 2005.
Thanks a lot everyone!
"Tim Decker" wrote in
message news:5109514@discussion.autodesk.com...
From Jimmy's post above, the blog he points to says that the following
code, that can be run in a script file (so it can be done to multiple
drawings) can do the trick. I have not tested this though.
fileopen "x:\drawings\drawing1.dwg"
(dictremove (namedobjdict) "AcSheetSetData")
qsave
fileopen "x:\drawings\drawing2...
and so on.
--
Bruce Sheldon wrote:
> Tim,
>
> Thanks for the reply.
> Doesn't really answer my question, though.
> Let me explain.
>
> * I want to remove a drawing from any association to a Sheet Set.
> * I don't want to even so much as see the Sheet Set (assume it's on
> the other side of the world).
> * I don't want to see the "script blocker" dialog box that asks if
> you want to remove, etc...
> * I want to script a whole bunch of DWGs, delete any and all Sheet
> Set associations from them.
>
> "Tim Decker" wrote in
> message news:5109444@discussion.autodesk.com...
> Normally if you try to import a drawing into a new sheet set, it will
> give you the option of removing the drawing from a previous sheet set,
> if it was part of a prior set.
>
> You can also just right click on a drawings existing sheet set entry,
> and it gives you an option to remove it from it's current set.
>
> SSLOCATE set to 1 will automatically open an associated sheet set if a
> drawing has one, to make it easy to "remove" it, if you don't know
> which sheet set it might be part of.
The LISP command looks like it does the job.
Anyone know how to stop the dialog box from coming up?
I'm talking about version 2005 since 2006 automatically removes
associations.
I'm running 2005 on one machine and 2006 on another. I can do the script on
my 2006 machine, but would be nice to know how to stop the dialog on 2005.
Thanks a lot everyone!
"Tim Decker"
message news:5109514@discussion.autodesk.com...
From Jimmy's post above, the blog he points to says that the following
code, that can be run in a script file (so it can be done to multiple
drawings) can do the trick. I have not tested this though.
fileopen "x:\drawings\drawing1.dwg"
(dictremove (namedobjdict) "AcSheetSetData")
qsave
fileopen "x:\drawings\drawing2...
and so on.
--
Bruce Sheldon wrote:
> Tim,
>
> Thanks for the reply.
> Doesn't really answer my question, though.
> Let me explain.
>
> * I want to remove a drawing from any association to a Sheet Set.
> * I don't want to even so much as see the Sheet Set (assume it's on
> the other side of the world).
> * I don't want to see the "script blocker" dialog box that asks if
> you want to remove, etc...
> * I want to script a whole bunch of DWGs, delete any and all Sheet
> Set associations from them.
>
> "Tim Decker"
> message news:5109444@discussion.autodesk.com...
> Normally if you try to import a drawing into a new sheet set, it will
> give you the option of removing the drawing from a previous sheet set,
> if it was part of a prior set.
>
> You can also just right click on a drawings existing sheet set entry,
> and it gives you an option to remove it from it's current set.
>
> SSLOCATE set to 1 will automatically open an associated sheet set if a
> drawing has one, to make it easy to "remove" it, if you don't know
> which sheet set it might be part of.
*Jimmy Bergmark
Re: Sheet Set Associatio
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-13-2006 12:41 PM in reply to:
*Bruce Sheldon
If you run the script with SmartPurger it automatically stops dialog boxes
like this one.
--
Best Regards, Jimmy Bergmark
CAD and Database Developer Manager at www.pharmadule-emtunga.com
Blog: http://jtbworld.blogspot.com
JTB FlexReport (FLEXnet / FLEXlm report tool) -
http://www.jtbworld.com/jtbflexreport
SmartPurger (Purges automatically) - http://www.jtbworld.com/smartpurger.htm
or download some freeware at http://www.jtbworld.com
More on AutoCAD 2006 and 2007
http://www.jtbworld.com/autocad2006.htm
http://www.jtbworld.com/autocad2007.htm
"Bruce Sheldon" wrote in message
news:5109623@discussion.autodesk.com...
Tim,
The LISP command looks like it does the job.
Anyone know how to stop the dialog box from coming up?
I'm talking about version 2005 since 2006 automatically removes
associations.
I'm running 2005 on one machine and 2006 on another. I can do the script on
my 2006 machine, but would be nice to know how to stop the dialog on 2005.
Thanks a lot everyone!
like this one.
--
Best Regards, Jimmy Bergmark
CAD and Database Developer Manager at www.pharmadule-emtunga.com
Blog: http://jtbworld.blogspot.com
JTB FlexReport (FLEXnet / FLEXlm report tool) -
http://www.jtbworld.com/jtbflexreport
SmartPurger (Purges automatically) - http://www.jtbworld.com/smartpurger.htm
or download some freeware at http://www.jtbworld.com
More on AutoCAD 2006 and 2007
http://www.jtbworld.com/autocad2006.htm
http://www.jtbworld.com/autocad2007.htm
"Bruce Sheldon"
news:5109623@discussion.autodesk.com...
Tim,
The LISP command looks like it does the job.
Anyone know how to stop the dialog box from coming up?
I'm talking about version 2005 since 2006 automatically removes
associations.
I'm running 2005 on one machine and 2006 on another. I can do the script on
my 2006 machine, but would be nice to know how to stop the dialog on 2005.
Thanks a lot everyone!
*Bruce Sheldon
Re: Sheet Set Associatio
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-14-2006 08:49 AM in reply to:
*Bruce Sheldon
Thanks, Jimmy, I will look into this.
"Jimmy Bergmark" wrote in message
news:5109640@discussion.autodesk.com...
If you run the script with SmartPurger it automatically stops dialog boxes
like this one.
--
Best Regards, Jimmy Bergmark
CAD and Database Developer Manager at www.pharmadule-emtunga.com
Blog: http://jtbworld.blogspot.com
JTB FlexReport (FLEXnet / FLEXlm report tool) -
http://www.jtbworld.com/jtbflexreport
SmartPurger (Purges automatically) - http://www.jtbworld.com/smartpurger.htm
or download some freeware at http://www.jtbworld.com
More on AutoCAD 2006 and 2007
http://www.jtbworld.com/autocad2006.htm
http://www.jtbworld.com/autocad2007.htm
"Bruce Sheldon" wrote in message
news:5109623@discussion.autodesk.com...
Tim,
The LISP command looks like it does the job.
Anyone know how to stop the dialog box from coming up?
I'm talking about version 2005 since 2006 automatically removes
associations.
I'm running 2005 on one machine and 2006 on another. I can do the script on
my 2006 machine, but would be nice to know how to stop the dialog on 2005.
Thanks a lot everyone!
"Jimmy Bergmark"
news:5109640@discussion.autodesk.com...
If you run the script with SmartPurger it automatically stops dialog boxes
like this one.
--
Best Regards, Jimmy Bergmark
CAD and Database Developer Manager at www.pharmadule-emtunga.com
Blog: http://jtbworld.blogspot.com
JTB FlexReport (FLEXnet / FLEXlm report tool) -
http://www.jtbworld.com/jtbflexreport
SmartPurger (Purges automatically) - http://www.jtbworld.com/smartpurger.htm
or download some freeware at http://www.jtbworld.com
More on AutoCAD 2006 and 2007
http://www.jtbworld.com/autocad2006.htm
http://www.jtbworld.com/autocad2007.htm
"Bruce Sheldon"
news:5109623@discussion.autodesk.com...
Tim,
The LISP command looks like it does the job.
Anyone know how to stop the dialog box from coming up?
I'm talking about version 2005 since 2006 automatically removes
associations.
I'm running 2005 on one machine and 2006 on another. I can do the script on
my 2006 machine, but would be nice to know how to stop the dialog on 2005.
Thanks a lot everyone!
