AutoCAD 2000/2000i/2002 DWG Format Archive

[#1]

I started using AutoCad 2000 a few months ago and I have been having a
problem pop up randomly ever since. I will be working along and
suddenly my screen is showing a screen from sometime in the past. It's
just as if the past hour or however long never happened. If I UNDO, it
undoes from that point. And Regen just regens at that point also. It
is not putting me back to the last autosave, because I autosave every 15

min and I lost probably an hour's worth of work. It seems to happen
more often when I zoom, but the last time I was inserting a block when
it happened.

The problem has occured half a dozen times and I uninstalled and
reinstalled AutoCad after it happened the first couple of times. It's
not happening to anyone else in the office, so it's not a bad AutoCad
disk.

Has anyone else ever heard of this problem, and more importantly, do you

know any way to solve it?

Please e-mail me presonally if you have any advice.
hilary@ringdu.com

[#2]

Set ISAVEPERCENT to 1
Set ISAVEBAK to 1
Set SAVETIME to 15

Do not rely on Autosave, learn to QSAVE, and have a good back-up & restore
procedure.

As far as the problem causing this I would look into that, which would
require more detail as to what your PC is, what OS, Memory, etc...

*******************************************************
Please, DO NOT send technical requests to me via private e-mail
*******************************************************

Tracy Lincoln
Assistant Moderator, Autodesk Discussion Groups

Discussion Group Links:
Index: http://discussion.autodesk.com
Rules: http://discussion.autodesk.com/webx?groundrules

Product Support: http://support.autodesk.com/
Knowledge Base: http://support.autodesk.com/ViewAnswerworks.asp
Downloads: http://support.autodesk.com/Downloads.asp