AutoCAD 2000/2000i/2002 Archive

Reply
*Crane, Dan
Message 1 of 6 (71 Views)

"units" not saved in drawing

71 Views, 5 Replies
06-30-2000 09:06 AM
After setting units to Architectural, I find that after setting them and
saving them, they do not seem be to retained after closing and reopening the
drawing. However it works on a new, fresh drawing. Why?

Any help is appreciated,

--
Daniel G. Crane II, PE
dcrane2@bech.com
*Hessler, Frank
Message 2 of 6 (71 Views)

Re: "units" not saved in drawing

07-03-2000 04:16 AM in reply to: *Crane, Dan
Dan,

I have experienced this also. Are you saving as R14?

--
Frank

Dan Crane wrote in message
news:ef279d5.-1@WebX.SaUCah8kaAW...
> After setting units to Architectural, I find that after setting them and
> saving them, they do not seem be to retained after closing and reopening
the
> drawing. However it works on a new, fresh drawing. Why?
>
> Any help is appreciated,
>
> --
> Daniel G. Crane II, PE
> dcrane2@bech.com
>
*Support], Christal Elliott [Autodesk
Message 3 of 6 (71 Views)

Re: "units" not saved in drawing

07-03-2000 02:09 PM in reply to: *Crane, Dan
Dan - Are you using a network version of Land Desktop by chance? If
so, refer to 'Drawing units are automatically changed'. On the
Autodesk Search web site (http://search.autodesk.com) enter this
string: TS37133

There is also a Land Desktop discussion group where you can post for
further details:

news://discussion.autodesk.com/autodesk.aec.land-desktop2

On Fri, 30 Jun 2000 16:06:12 +0000, "Dan Crane"
wrote:

>After setting units to Architectural, I find that after setting them and
>saving them, they do not seem be to retained after closing and reopening the
>drawing. However it works on a new, fresh drawing. Why?
>
>Any help is appreciated,

Christal Elliott
Autodesk Product Support, USA
WW Support and Services, Autodesk
Discussion Q & A: http://www.autodesk.com/discussion
*Crane, Dan
Message 4 of 6 (71 Views)

Re:

07-05-2000 06:24 AM in reply to: *Crane, Dan
Yes! Why???
dc2

"Frank Hessler" wrote in message
news:ef279d5.0@WebX.SaUCah8kaAW...
> Dan,
>
> I have experienced this also. Are you saving as R14?
>
> --
> Frank
>
> Dan Crane wrote in message
> news:ef279d5.-1@WebX.SaUCah8kaAW...
> > After setting units to Architectural, I find that after setting them and
> > saving them, they do not seem be to retained after closing and reopening
> the
> > drawing. However it works on a new, fresh drawing. Why?
> >
> > Any help is appreciated,
> >
> > --
> > Daniel G. Crane II, PE
> > dcrane2@bech.com
> >
>
*Crane, Dan
Message 5 of 6 (71 Views)

Re:

07-05-2000 06:25 AM in reply to: *Crane, Dan
No, just A2K.
dc2

"Christal Elliott [Autodesk Support]"
wrote in message news:q402msc9r3ptl0fd8hdsbfh0g0v9pf9oa8@4ax.com...
> Dan - Are you using a network version of Land Desktop by chance? If
> so, refer to 'Drawing units are automatically changed'. On the
> Autodesk Search web site (http://search.autodesk.com) enter this
> string: TS37133
>
> There is also a Land Desktop discussion group where you can post for
> further details:
>
> news://discussion.autodesk.com/autodesk.aec.land-desktop2
>
> On Fri, 30 Jun 2000 16:06:12 +0000, "Dan Crane"
> wrote:
>
> >After setting units to Architectural, I find that after setting them and
> >saving them, they do not seem be to retained after closing and reopening
the
> >drawing. However it works on a new, fresh drawing. Why?
> >
> >Any help is appreciated,
>
> Christal Elliott
> Autodesk Product Support, USA
> WW Support and Services, Autodesk
> Discussion Q & A: http://www.autodesk.com/discussion
*Hessler, Frank
Message 6 of 6 (71 Views)

Re:

07-06-2000 07:45 AM in reply to: *Crane, Dan
Dan,

Save it in R2000 and you won't have the problem.

--
Frank

Dan Crane wrote in message
news:ef279d5.2@WebX.SaUCah8kaAW...
> Yes! Why???
> dc2
>
> "Frank Hessler" wrote in message
> news:ef279d5.0@WebX.SaUCah8kaAW...
> > Dan,
> >
> > I have experienced this also. Are you saving as R14?
> >
> > --
> > Frank
> >
> > Dan Crane wrote in message
> > news:ef279d5.-1@WebX.SaUCah8kaAW...
> > > After setting units to Architectural, I find that after setting them
and
> > > saving them, they do not seem be to retained after closing and
reopening
> > the
> > > drawing. However it works on a new, fresh drawing. Why?
> > >
> > > Any help is appreciated,
> > >
> > > --
> > > Daniel G. Crane II, PE
> > > dcrane2@bech.com
> > >
> >
>

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community




Connect with AutoCAD

Twitter

Facebook

Blogs

Pinterest

Youtube