Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
In addition, make sure that the "Demand load ObjectARX apps" is not disabled
in the Options->Open and Save dialog.
Jeff
"OLD-CADaver" wrote in message
news:32643161.1080334541970.JavaMail.jive@jiveforum1...
> Try reloading ACMTED.ARX from the support directory.
On Fri, 26 Mar 2004 20:50:21 GMT, mmwick
wrote:
>Unknown command "MTEXT". Press F1 for help. MTEXTED is set to internal. Any help?..please.
Check to see that DEMANDLOAD is set to 3.
Good, now we know tha it wasn't being DEMANDLOADed. Follow Mrs White and Mishler's advice and set DEMANLOAD=3. Then make sure the support directory is in the search path.
You might try "REDEFINE" "MTEXT"
if someone has set "UNDEFINE" "MTEXT" they have told ACAD that "MTEXT" is not a command (an old prank)
You can "UNDEFINE" any command
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")