Alias General

Reply
New Member
tritonrd1
Posts: 1
Registered: ‎01-06-2009
Message 1 of 2 (563 Views)

Alias Design and Surfacing a corner

563 Views, 1 Replies
08-22-2012 04:56 AM

Hi, 

 

I wonder if one of you guys can help me.  I`m currently surfacing a tray of sorts in Alias design and it has four corners.  Each corner is percentage of a 3D sphere, similar to a ball corner in essence. I`m having trouble getting the surface to provide a smooth transition between the 3 connecting edges.  See the images attached.  Can anyone help and provide any advice in surfacing of these type of corners.  I`ve looked at the Alias ball corner tutorial but is doesn't help too much. 

 

Greatly appreciate it if anyone can help.

 

Cheers


Dave

 

:smiley happy:

Active Contributor
dwstucke
Posts: 29
Registered: ‎02-01-2005
Message 2 of 2 (480 Views)

Re: Alias Design and Surfacing a corner

10-02-2012 05:28 AM in reply to: tritonrd1

If it's critical that the corner is truely a spherical you could try working backwards. Try making the corners first by taking slices out of sphere and then surfacing the rest of the major surfaces of the tray that are in-between.  While it's backwards I've used this approach on occasion with good results. 

 

 

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community