fem2esh - Make esh file from fem file for a specified design scenario
Version 2014.01.00.0025-W64/X64 26-Jul-2013
Copyright (c) 2013, Autodesk, Inc. All rights reserved.

  Version of fem2esh.exe          : 2014.01000025
  Version of dcx1-win-x64.dll     : 2014.01000025
  Version of femapi-win-x64.dll   : 2014.01000025
  Version of agsdb_ar-win-x64.dll : 2014.01000025
  Version of tsx2tsy.exe          : 2014.01000025

  Input Model     : C:\Users\user\Documents\LCRD\LCRD FEM\812616TowerB_2013-11-08FULLMODEL.ds_data\1\ds
  Input File      : C:\Users\user\Documents\LCRD\LCRD FEM\812616TowerB_2013-11-08FULLMODEL.fem
  Output File     : C:\Users\user\Documents\LCRD\LCRD FEM\812616TowerB_2013-11-08FULLMODEL.ds_data\1\ds.mod\group.esh
  Log File        : C:\Users\user\Documents\LCRD\LCRD FEM\812616TowerB_2013-11-08FULLMODEL.ds_data\1\ds.mod\group.ldx
  Design scenario : 1
  Analysis type   : Linear Stress
  Start time      : 2013/11/12-09:51:20  

  --- Get 136 active element parts in range [1, 2002] from fem file
  --- 7 enabled L&C groups are defined
  --- Get 3445354 points defined in range [1, 4989717] from fem file
  Calling the Surface Topology Generator (tsx2tsy)...
  tsx2tsy: Update part surface contact/bonding data (duration=4 sec.)
  --- No mid-side node required
  Set up nodal properties such as admissible BC etc. by adjacent elements...

  In working on FEM file for a FEA model
  Terminal Error: FEM2ESH#64
    FEM_ERROR_3D_ELEMENT_NODE_OVER_BOUND 4989718
2013/11/12-09:51:31