fem2esh - Make esh file from fem file for a specified design scenario
Version 2012.01.00.0017-W64/X64 15-Jun-2011
Copyright (c) 2011, Autodesk, Inc. All rights reserved.

  Version of fem2esh.exe          : 2012.01000017
  Version of dcx1-win-x64.dll     : 2012.01000017
  Version of femapi-win-x64.dll   : 2012.01000017
  Version of agsdb_ar-win-x64.dll : 2012.01000017
  Version of tsx2tsy.exe          : 2012.01000017

  Input Model     : C:\Users\jtorres\Desktop\Javier Torres Goitia\403x (Less Details)\120 in Model\No Gap (Filler-Mull)\403x 120 in (No Gap, with bolt holes).ds_data\1\ds
  Input File      : C:\Users\jtorres\Desktop\Javier Torres Goitia\403x (Less Details)\120 in Model\No Gap (Filler-Mull)\403x 120 in (No Gap, with bolt holes).fem
  Output File     : C:\Users\jtorres\Desktop\Javier Torres Goitia\403x (Less Details)\120 in Model\No Gap (Filler-Mull)\403x 120 in (No Gap, with bolt holes).ds_data\1\ds.mod\group.esh
  Log File        : C:\Users\jtorres\Desktop\Javier Torres Goitia\403x (Less Details)\120 in Model\No Gap (Filler-Mull)\403x 120 in (No Gap, with bolt holes).ds_data\1\ds.mod\group.ldx
  Design scenario : 1
  Analysis type   : Linear Stress
  Start time      : 2012/10/08-11:06:56  

  --- Get 8 active element parts in range [1, 8] from fem file
  --- 4 enabled L&C groups are defined
  --- Get 1738907 points defined in range [1, 1738907] from fem file
  Calling the Surface Topology Generator (tsx2tsy)...
  tsx2tsy: re-made part surface contact/bonding data (duration=2 sec.)
  --- No mid-side node required
  Set up FEM points and B.C. by connected elements...

  In working on FEM file or outputting ESH file
  Terminal Error: FEM2ESH#59, FEMAPI#1
    FEM_ERROR_NO_1D_ELEMENT
2012/10/08-11:06:58